Datasheet4U Logo Datasheet4U.com

PCA2002 - CMOS

General Description

The PCA2002 is a CMOS1 integrated circuit for battery operated wrist watches with a 32 kHz quartz crystal as the timing element and a bipolar stepping motor.

The quartz crystal oscillator and the frequency divider are optimized for minimum current consumption.

Key Features

  • Amplitude-regulated 32 kHz quartz crystal oscillator, with excellent frequency stability and high immunity to leakage currents.
  • Electrically programmable time calibration with 1 ppm resolution stored in One Time Programmable (OTP) memory.
  • The quartz crystal is the only external component required.
  • Very low current consumption: typically 90 nA.
  • Output pulses for bipolar stepping motors.
  • Five different programmable output periods (1 s to 30 s).
  • Output pulse widt.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PCA2125 SPI Real-time clock/calendar NXP Semiconductors
PCA24S08 1024 x 8-bit CMOS EEPROM NXP Semiconductors
PCA0102A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0163A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0174A-LF Telecommunications - Satellite Z-Communications

Other Datasheets by NXP Semiconductors

Part Number Description
PCA2000 CMOS
PCA2001 CMOS
PCA2003 CMOS
PCA21125 SPI-bus Real-Time Clock/calendar
PCA2117 Automotive LCD driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCA2002 32 kHz watch circuit with programmable output period and pulse width Rev. 9 — 6 December 2019 Product data sheet 1. General description The PCA2002 is a CMOS1 integrated circuit for battery operated wrist watches with a 32 kHz quartz crystal as the timing element and a bipolar stepping motor. The quartz crystal oscillator and the frequency divider are optimized for minimum current consumption. A timing accuracy of 1 ppm is achieved with a programmable, digital frequency adjustment. The output period and the output pulse width can be programmed. It can be selected between a full output pulse or a chopped output pulse with a duty cycle of 75 %. In addition, a stretching pulse can be added to the primary driving pulse.