PTN3356R1 Overview
PTN3356R1 is a ROM-based DisplayPort to VGA adapter optimized primarily for motherboard applications, to convert a DisplayPort signal from the chip set to an analog video signal that directly connects to the VGA connector. PTN3356R1 integrates a DisplayPort receiver, a high-speed triple video digital-to-analog converter that supports a wide range of display resolutions, for example, VGA to WUXGA (see Table 8)....
PTN3356R1 Key Features
- Main Link: 1-lane and 2-lane modes supported
- HBR (High Bit Rate) at 2.7 Gbit/s per lane
- RBR (Reduced Bit Rate) at 1.62 Gbit/s per lane
- BER (Bit Error Rate) better than 109
- DisplayPort Link down-spreading supported
- 1 MHz AUX channel
- Supports native AUX CH syntax
- Supports I2C-bus over AUX CH syntax
- Active HIGH Hot Plug Detect (HPD) signal to the source
- Supports Alternate Scrambler Seed Reset (ASSR)
PTN3356R1 Applications
- Main Link: 1-lane and 2-lane modes supported HBR (High Bit Rate) at 2.7 Gbit/s per lane RBR (Reduced Bit Rate) at 1.62 Gbit/s per lane BER (Bit Error Rate
- 1 MHz AUX channel Supports native AUX CH syntax Supports I2C-bus over AUX CH syntax
- Active HIGH Hot Plug Detect (HPD) signal to the source
- Supports Alternate Scrambler Seed Reset (ASSR)
- Supports Alternate Enhanced Framing mode