PTN36502 - DisplayPort v1.2 combo redriver

NXP

📥 Download Datasheet

PTN36502 Datasheet Preview — Preview of PTN36502 PDF

Datasheet Details

Part number	PTN36502
Manufacturer	NXP
File Size	678.81 KB
Description	DisplayPort v1.2 combo redriver
Datasheet	PTN36502-NXP.pdf

PTN36502 Product details

Description

PTN36502/PTN36502A is a Type-C USB 3.1 Gen 1/ DP1.2 combo redriver that is optimized for USB 3.1 Gen 1 and DisplayPort applications on either the Downstream Facing Port (DFP) or Upstream Facing Port (UFP) by following the four high-speed differential data flows to extend the signal reach.

Features

Flexible Type-C USB/DP combo redriver supports four signaling combinations specified in USB Type-C and VESA DisplayPort Alt Mode Standards through either I2C slave interface or ternary GPIO pins.
Mode 1: One USB 3.1 Gen 1 port only.
Mode 2: One USB 3.1 Gen 1 port + 2 lane DP + AUX channel.
Mode 3: 4 lane DP + AUX channel.
Supports USB 3.1 Gen 1 data rate of 5 Gbps, and DisplayPort data rates at 1.62 Gbps, 2.7 Gbps and 5.4 Gbps (HBR2), AUX at 1 Mbps.

📁 PTN36502 Similar Datasheet

PTN3300A - DVI/HDMI level shifter (NXP Semiconductors)
PTN3300B - DVI and HDMI level shifter (NXP Semiconductors)
PTN3331 - High speed differential line driver (NXP Semiconductors)
PTN3332 - High speed differential line receiver (NXP Semiconductors)
PTN3341 - High speed differential line driver (NXP Semiconductors)
PTN3342 - High speed differential line receiver (NXP Semiconductors)
PTN0402 - Commercial Thin Film Chip Resistor (Vishay)
PTN04050A - POSITIVE-TO-NEGATIVE CONVERTER (Texas Instruments)

Other Datasheets by NXP

PTN36502A - DisplayPort v1.2 combo redriver
PTN36001 - SuperSpeed USB3.0 redriver
PTN36043 - SuperSpeed active switch
PTN36043A - USB Type-C SuperSpeed active switch
PTN36221A - Single-channel SuperSpeed USB3.0 redriver
PTN36241B - SuperSpeed USB3.0 redriver

Published: Jul 10, 2020 |