Datasheet4U Logo Datasheet4U.com

PTN36502A - DisplayPort v1.2 combo redriver

Download the PTN36502A datasheet PDF. This datasheet also covers the PTN36502 variant, as both devices belong to the same displayport v1.2 combo redriver family and are provided as variant models within a single manufacturer datasheet.

General Description

PTN36502/PTN36502A is a Type-C USB 3.1 Gen 1/ DP1.2 combo redriver that is optimized for USB 3.1 Gen 1 and DisplayPort applications on either the Downstream Facing Port (DFP) or Upstream Facing Port (UFP) by following the four high-speed differential data flows to extend the signal reach.

Key Features

  • Flexible Type-C USB/DP combo redriver supports four signaling combinations specified in USB Type-C and VESA DisplayPort Alt Mode Standards through either I2C slave interface or ternary GPIO pins.
  • Mode 1: One USB 3.1 Gen 1 port only.
  • Mode 2: One USB 3.1 Gen 1 port + 2 lane DP + AUX channel.
  • Mode 3: 4 lane DP + AUX channel.
  • Supports USB 3.1 Gen 1 data rate of 5 Gbps, and DisplayPort data rates at 1.62 Gbps, 2.7 Gbps and 5.4 Gbps (HBR2), AUX at 1 Mbps.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (PTN36502-NXP.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription for PTN36502A (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for PTN36502A. For precise diagrams, and layout, please refer to the original PDF.

PTN36502/PTN36502A Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo redriver Rev. 3 — 28 September 2018 Product data sheet 1 General description PTN36502/PTN36502A is a Ty...

View more extracted text
18 Product data sheet 1 General description PTN36502/PTN36502A is a Type-C USB 3.1 Gen 1/ DP1.2 combo redriver that is optimized for USB 3.1 Gen 1 and DisplayPort applications on either the Downstream Facing Port (DFP) or Upstream Facing Port (UFP) by following the four high-speed differential data flows to extend the signal reach. PTN36502/PTN36502A addresses high-speed signal quality enhancement requirements for implementation of a USB Type-C interface in a platform that supports the VESA DisplayPort Alt Mode Standard v1.0a, includes a DisplayPort Branch or Sink function.

More Datasheets from NXP Semiconductors

Part Number Description
PTN36502 DisplayPort v1.2 combo redriver
PTN36001 SuperSpeed USB3.0 redriver
PTN36043 SuperSpeed active switch
PTN36043A USB Type-C SuperSpeed active switch
PTN36221A Single-channel SuperSpeed USB3.0 redriver
PTN36241B SuperSpeed USB3.0 redriver
PTN36241G SuperSpeed USB3.0 redriver
PTN36242L Dual port SuperSpeed USB3.0 redriver
PTN3222 1-port eUSB2 to USB2 redriver
PTN3310 High-speed serial logic translators