900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

S9KEAZN32AMLC Datasheet

32-bit MCU

No Preview Available !

NXP Semiconductors
Data Sheet: Technical Data
Document Number S9KEA64P64M20SF0
Rev. 6, 10/2019
KEA64 Sub-Family Data
Sheet
Supports the following:
S9KEAZN16AMLC(R),
S9KEAZN32AMLC(R),
S9KEAZN64AMLC(R),
S9KEAZN16AMLH(R),
S9KEAZN32AMLH(R), and
S9KEAZN64AMLH(R)
Key features
• Operating characteristics
– Voltage range: 2.7 to 5.5 V
– Flash write voltage range: 2.7 to 5.5 V
– Temperature range (ambient): -40 to 125°C
• Performance
– Up to 40 MHz Arm® Cortex-M0+ core and up to 20
MHz bus clock
– Single cycle 32-bit x 32-bit multiplier
– Single cycle I/O access port
• Memories and memory interfaces
– Up to 64 KB flash
– Up to 256 B EEPROM
– Up to 4 KB RAM
• Clocks
– Oscillator (OSC) - supports 32.768 kHz crystal or 4
MHz to 20 MHz crystal or ceramic resonator; choice
of low power or high gain oscillators
– Internal clock source (ICS) - internal FLL with
internal or external reference, 31.25 kHz pre-
trimmed internal reference for 40 MHz system and
core clock.
– Internal 1 kHz low-power oscillator (LPO)
S9KEA64P64M20SF0
• System peripherals
– Power management module (PMC) with three power
modes: Run, Wait, Stop
– Low-voltage detection (LVD) with reset or interrupt,
selectable trip points
– Watchdog with independent clock source (WDOG)
– Programmable cyclic redundancy check module
(CRC)
– Serial wire debug interface (SWD)
– Bit manipulation engine (BME)
• Security and integrity modules
– 64-bit unique identification (ID) number per chip
• Human-machine interface
– Up to 57 general-purpose input/output (GPIO)
– Up to 22 general-purpose input/output (GPIO)
– Up to 14 general-purpose input/output (GPIO)
– Two up to 8-bit keyboard interrupt modules (KBI)
– External interrupt (IRQ)
• Analog modules
– One up to 16-channel 12-bit SAR ADC, operation in
Stop mode, optional hardware trigger (ADC)
– Two analog comparators containing a 6-bit DAC
and programmable reference input (ACMP)
• Timers
– One 6-channel FlexTimer/PWM (FTM)
– Two 2-channel FlexTimer/PWM (FTM)
– One 2-channel periodic interrupt timer (PIT)
– One real-time clock (RTC)
• Communication interfaces
– Two SPI modules (SPI)
– Up to three UART modules (UART)
– One I2C module (I2C)
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.


NXP Semiconductors Electronic Components Datasheet

S9KEAZN32AMLC Datasheet

32-bit MCU

No Preview Available !

• Package options
– 64-pin LQFP
– 32-pin LQFP
KEA64 Sub-Family Data Sheet, Rev. 6, 10/2019
2 NXP Semiconductors


Part Number S9KEAZN32AMLC
Description 32-bit MCU
Maker NXP
PDF Download

S9KEAZN32AMLC Datasheet PDF






Similar Datasheet

1 S9KEAZN32AMLC 32-bit MCU
NXP
2 S9KEAZN32AMLH 32-bit MCU
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy