Datasheet4U Logo Datasheet4U.com

TDA8559 - Low-voltage stereo headphone amplifier

Datasheet Summary

Description

APPLICATIONS Portable telephones Walk-mans Portable audio

Mains fed equipment.

The TDA8559 is a stereo amplifier that operates over a wide supply voltage range from 1.9 to 30 V and consumes a very low quiescent current.

Features

  • Operating voltage from 1.9 to 30 V.
  • Very low quiescent current.
  • Low distortion.
  • Few external components.
  • Differential inputs.
  • Usable as a mono amplifier in Bridge-Tied Load (BTL) or stereo Single-Ended (SE).
  • Single-ended mode without loudspeaker capacitor.
  • Mute and standby mode.
  • Short-circuit proof to ground, to supply voltage (.

📥 Download Datasheet

Datasheet preview – TDA8559

Datasheet Details

Part number TDA8559
Manufacturer NXP
File Size 264.57 KB
Description Low-voltage stereo headphone amplifier
Datasheet download datasheet TDA8559 Datasheet
Additional preview pages of the TDA8559 datasheet.

📁 Similar Datasheet

  • TDA8559T - Low-voltage stereo headphone amplifier (Philips)
  • TDA8547 - 2 x 0.7W BTL AUDIO AMPLIFIER (UTC)
  • TDA8566 - stereo BTL car radio power amplifier (NXP Semiconductors)
  • TDA8577 - Dual common-mode rejection differential line receiver (Philips)
  • TDA8588AJ - Power Amplifier and Multiple Voltage Regulator (Philips)
  • TDA8588BJ - Power Amplifier and Multiple Voltage Regulator (Philips)
  • TDA8588J - Power Amplifier and Multiple Voltage Regulator (Philips)
  • TDA8589BJ - I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator (Philips)
  • TDA8595 - I2C-bus controlled 4 x 45 W power amplifer (NXP Semiconductors)
  • TDA8025 - IC card interface (NXP Semiconductors)
Other Datasheets by NXP
  • TDA8551 - 1 W BTL audio amplifier with digital volume control
  • TDA8552T - 2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing
  • TDA8552TS - 2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing
  • TDA8501 - PAL/NTSC encoder
  • TDA8505 - SECAM encoder
  • TDA8510J - 26 W BTL and 2 x 13 W SE power amplifiers
  • TDA8511J - 4 x 13 W single-ended power amplifiers
  • TDA8512J - 26 W BTL and 2 x 13 W SE or 4 x 13 W SE power amplifier

Full PDF Text Transcription

Click to expand full text
INTEGRATED CIRCUITS DATA SHEET TDA8559 Low-voltage stereo headphone amplifier Product specification Supersedes data of 1996 Jan 02 File under Integrated Circuits, IC01 1997 Jun 27 Philips Semiconductors Product specification Low-voltage stereo headphone amplifier FEATURES • Operating voltage from 1.9 to 30 V • Very low quiescent current • Low distortion • Few external components • Differential inputs • Usable as a mono amplifier in Bridge-Tied Load (BTL) or stereo Single-Ended (SE) • Single-ended mode without loudspeaker capacitor • Mute and standby mode • Short-circuit proof to ground, to supply voltage (<10 V) and across load • No switch on or switch off clicks • ESD protected on all pins.
Published: |