TJA1083G Datasheet | NXP Semiconductors

description The TJA1083G Flex Ray node transceiver is pliant with the Flex Ray Electrical Physical Layer specification ISO 17458-4:2013 (see Ref. 1 and Ref. 2). It is primarily intended for munication systems operating at between 2.5 Mbit/s and 10 Mbit/s, and provides an advanced interface between the protocol controller and the physical bus in a Flex Ray network. The TJA1083G offers an optimized solution for Electronic Control Unit (ECU) applications that do not need enhanced power management and are typically switched by the ignition or activated by a dedicated wake-up line. The TJA1083G provides a differential transmit capability to the network and a differential receive capability to the Flex Ray controller. It offers excellent Electro Magnetic patibility (EMC) performance as well as high Electro Static Discharge (ESD) protection. The TJA1083G actively monitors system performance using dedicated error and status information (readable via SPI), as well as internal voltage and temperature monitoring. The TJA1083G is fully functionally and pin patible with the TJA1083 (see Ref. 3). 2. Features and benefits 2.1 Optimized for time triggered munication systems - pliant with ISO 17458-4:2013 (see Ref. 2) - Automotive product qualification in accordance with AEC-Q100 - Data transfer rates from 2.5 Mbit/s to 10 Mbit/s - Supports 60 ns minimum bit time at 400 m V differential input voltage - Very low Electro Magnetic Emission (EME) to support unshielded cable, meeting the latest industry standards - Differential receiver with high mon-mode range for excellent Electro Magnetic Immunity (EMI), meeting the latest industry standards - Auto I/O level adaptation to host controller supply voltage VIO - Can be used in 14 V, 24 V and 48 V powered systems - Instant transmitter shut-down interface (BGE pin) 2.2 Low-power management - Very low current consumption in Standby mode - Remote wake-up via a wake-up pattern or dedicated Flex Ray data frames on the bus lines NXP Semiconductors TJA10...