Datasheet4U Logo Datasheet4U.com

54122 - Retriggerable Resettable Multivibrator

General Description

The ’122

Key Features

  • positive and negative DC level triggering inputs complementary outputs an optional 10 kX internal timing resistor and an overriding Direct Clear (CD) input When the circuit is in the quasi-stable (delay) state another trigger applied to the inputs (per Truth Table) will cause the delay period to start again without disturbing the outputs This process can be repeated indefinitely and thus the output pulse period (Q HIGH Q LOW) can be made as long as desired Alternatively a delay period can be ter.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
54122 Retriggerable Monostable Multivibrators Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
54121 Monostable Multivibrator
54125 Quad TRI-STATE Buffers
5410 Triple 3-Input NAND Gates
54132 Quad 2-Input NAND Gates
54148 8-3 Line Priority Encoder
54150 Data Selectors/Multiplexers
54151 Data Selectors/Multiplexers
54151A Data Selectors/Multiplexers
54153 Dual 4-Line to 1-Line Data Selectors/Multiplexers
54154 4-Line to 16-Line Decoders/Demultiplexers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
54122 DM74122 Retriggerable Resettable Multivibrator June 1989 54122 DM74122 Retriggerable Resettable Multivibrator General Description The ’122 features positive and negative DC level triggering inputs complementary outputs an optional 10 kX internal timing resistor and an overriding Direct Clear (CD) input When the circuit is in the quasi-stable (delay) state another trigger applied to the inputs (per Truth Table) will cause the delay period to start again without disturbing the outputs This process can be repeated indefinitely and thus the output pulse period (Q HIGH Q LOW) can be made as long as desired Alternatively a delay period can be terminated by a LOW signal applied to CD which also prevents triggering An internal connection from CD to the input gate makes it possible to trigg