Datasheet4U Logo Datasheet4U.com

DP8310 - (DP8310 / DP8311) Octal Latched Peripheral Drivers

General Description

The DP8310 and DP8311 Octal Latched Peripheral Drivers provide the function of latching eight bits of data with open collector outputs, each driving up to 100 mA DC with an operating voltage range of 30V.

Key Features

  • n High current, high voltage open collector outputs n Low current, high voltage inputs Connection Diagrams Dual-In-Line Package Dual-In-Line Package DS005246-1 DS005246-2 Top View Order Number DP8310N or DP8311N See NS Package Number N20A Top View © 2000 National Semiconductor Corporation DS005246 www. national. com www. DataSheet. in DP8310/DP8311 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DP83016AUG Falcon Switch 16-port Gigabit Ethernet Switch Engine National
DP8303 8 Bit Tri-State Bidirectional Transceiver National
DP8303 (DP8304B) Octal 3 State Bidirectional Bus Transceiver AMD
DP8303A 8 Bit Tri-State Bidirectional Transceiver National
DP8304B 8-BIT TRI-STATE BIDIRECTIONAL TRANSCEIVER National

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DP8311 (DP8310 / DP8311) Octal Latched Peripheral Drivers
DP83220 CDL Twisted Pair FDDI Transceiver Device
DP83222 CYCLONE Twisted Pair FDDI Stream Cipher Device
DP83223 TWISTER High Speed Networking Transceiver Device
DP83231 CRD Device

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DP8310/DP8311 Octal Latched Peripheral Drivers February 2000 DP8310/DP8311 Octal Latched Peripheral Drivers General Description The DP8310 and DP8311 Octal Latched Peripheral Drivers provide the function of latching eight bits of data with open collector outputs, each driving up to 100 mA DC with an operating voltage range of 30V. Both devices are designed for low input currents, high input/output voltages, and feature a power up clear (outputs off) function. The DP8310 is positive edge latching. Two active low write/ enable inputs are available for convenient data bussing without external gating. The DP8311 is positive edge latching. The active low strobe input latches data or allows fall through operation when held at logic “0”.