Datasheet4U Logo Datasheet4U.com

DP83840A - 10/100 Mb/s Ethernet Physical Layer

Description

The DP83840A is a Physical Layer device for Ethernet 10BASE-T and 100BASE-X using category 5 Unshielded, Type 1 Shielded and Fiber Optic cables.

This VLSI device is designed for easy implementation of 10/100 Mb/s Ethernet LANs.

Features

  • IEEE 802.3 10BASE-T compatible--ENDEC and UTP/ STP transceivers and filters built-in.
  • IEEE 802.3u 100BASE-X compatible--support for 2 pair Category 5 UTP (100m), Type 1 STP and Fiber Optic Transceivers--Connects directly to the DP83223 Twisted Pair Transceiver.
  • ANSI X3T12 TP-PMD compatible.
  • IEEE 802.3u Auto-Negotiation for automatic speed selection.
  • IEEE 802.3u compatible Media Independent Interface (MII) with Serial Management Interface.
  • In.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DP83843 DP83843 PHYTER (Rev. B) ETCTI
DP83846A DP83846A DsPHYTER - Single 10/100 Ethernet Transceiver (Rev. E) ETCTI
DP83847 DP83847 DsPHYTER II - Single 10/100 Ethernet Transceiver ETCTI
DP83848-EP PHYTER Extreme Temperature Single Port 10/100 Mb/s Ethernet Physical Layer (Rev. D) ETCTI
DP83848-HT DP83848-HT PHYTER Military Temperature Single Port 10/100 MB/S Ethernet Physical Layer Transceiver ETCTI

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DP83843BVJE PHYTER
DP83846A DsPHYTER -Single 10/100 Ethernet Transceiver
DP83847 DsPHYTER II - Single 10/100 Ethernet Transceiver
DP83848C PHYTER - Commercial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
DP83848H Extreme Temperature Single 10/100 Ethernet Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DP83840A 10/100 Mb/s Ethernet Physical Layer March 1997 DP83840A 10/100 Mb/s Ethernet Physical Layer General Description The DP83840A is a Physical Layer device for Ethernet 10BASE-T and 100BASE-X using category 5 Unshielded, Type 1 Shielded and Fiber Optic cables. This VLSI device is designed for easy implementation of 10/100 Mb/s Ethernet LANs. It interfaces to the PMD sublayer through National Semiconductor's DP83223 Twisted Pair Transceiver, and to the MAC layer through a Media Independent Interface (MII), ensuring interoperability between products from different vendors. The DP83840A is designed with National Semiconductor's BiCMOS process.
Published: |