Datasheet4U Logo Datasheet4U.com

DS91M040 - 125 MHz Quad M-LVDS Transceiver

Description

The DS91M040 is a quad M-LVDS transceiver designed for driving / receiving clock or data signals to / from up to four multipoint networks.

Features

  • DC - 125 MHz / 250 Mbps low jitter, low skew, low power operation.
  • Wide Input Common Mode Voltage Range allows up to.
  • ±2V of GND noise Conforms to TIA/EIA-899 M-LVDS Standard Pin selectable M-LVDS receiver type (1 or 2) Controlled transition times (2.0 ns typ) minimize reflections 8 kV ESD on M-LVDS I/O pins protects adjoining components.
  • Flow-through pinout simplifies PCB layout.
  • Small 5 mm x 5 mm LLP-32 space saving package.

📥 Download Datasheet

Datasheet preview – DS91M040

📁 Similar Datasheet

  • DS91M040 - 125 MHz Quad M-LVDS Transceiver (Texas Instruments)
  • DS91M047 - 125 MHz Quad M-LVDS Line Driver (Texas Instruments)
  • DS91M124 - 125 MHz 1:4 M-LVDS Repeater (Texas Instruments)
  • DS91M125 - 125 MHz 1:4 M-LVDS Repeater (Texas Instruments)
  • DS9100 - Touch and Hold Probe Stampings (Dallas Semiconducotr)
  • DS9101 - Multipurpose (Maxim Integrated)
  • DS9104 - Digital Decoder Ring (Dallas Semiconducotr)
  • DS9105 - iButton Number Set (Dallas Semiconducotr)
  • DS9106 - Ibutton Halo (Maxim Integrated Products)
  • DS9107 - iButton Capsule (Maxim Integrated Products)
Other Datasheets by National Semiconductor
  • DS91M047 - 125 MHz Quad M-LVDS Transceiver
  • DS91M125 - 125 MHz 1:4 M-LVDS Repeater
  • DS91C176 - Multipoint-LVDS (M-LVDS) Transceivers
  • DS91C180 - Multipoint LVDS (M-LVDS) Line Driver/Receiver
  • DS91D176 - Multipoint-LVDS (M-LVDS) Transceivers
  • DS91D180 - Multipoint LVDS (M-LVDS) Line Driver/Receiver
  • DS90C031 - LVDS Quad CMOS Differential Line Driver
  • DS90C031B - LVDS Quad CMOS Differential Line Driver

Full PDF Text Transcription

Click to expand full text
DS91M040 125 MHz Quad M-LVDS Transceiver May 13, 2008 DS91M040 125 MHz Quad M-LVDS Transceiver General Description The DS91M040 is a quad M-LVDS transceiver designed for driving / receiving clock or data signals to / from up to four multipoint networks. M-LVDS (Multipoint LVDS) is a new family of bus interface devices based on LVDS technology specifically designed for multipoint and multidrop cable and backplane applications. It differs from standard LVDS in providing increased drive current to handle double terminations that are required in multipoint applications. Controlled transition times minimize reflections that are common in multipoint configurations due to unterminated stubs.
Published: |