The LM2506 device adapts RGB style display interfaces to the Mobile Pixel Link (MPL) Level zero serial link.
The LM2506 supports one RGB display at up to 18-bit color depth and 800 X 300 pixels (over 216 Mbps and 13.2 MHz PCLK) is supported.
Key Features
n RGB Display Interface support up to 800 x 300 1⁄2SVGA formats n MPL-Level 0 Physical Layer using two data and one clock signal n Low Power Consumption n Pinout mirroring enables straight through layout with minimal vias n Level translation between host and display n Auto Power Down on STOP PCLK n Link power down mode reduces quiescent power under < 10 µA n 1.74V to 2.0V core / analog supply voltage range n 1.74V to 3.0V I/O supply voltage range n.
Full PDF Text Transcription for LM2506 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
LM2506. For precise diagrams, and layout, please refer to the original PDF.
www.DataSheet4U.com August 2006 LM2506 Low Power Mobile Pixel Link (MPL) Level 0, 18-bit RGB Display Interface Serializer and Deserializer LM2506 Low Power Mobile Pixel L...
View more extracted text
Interface Serializer and Deserializer LM2506 Low Power Mobile Pixel Link (MPL) Level 0, 18-bit RGB Display Interface Serializer and Deserializer General Description The LM2506 device adapts RGB style display interfaces to the Mobile Pixel Link (MPL) Level zero serial link. The LM2506 supports one RGB display at up to 18-bit color depth and 800 X 300 pixels (over 216 Mbps and 13.2 MHz PCLK) is supported. A mode pin configures the device as a Serializer (SER) or Deserializer (DES) so the same chip can be used on both sides of the interface. The interconnect is reduced from 22 signals to only 3 active signals with the LM2506
LM2506 Datasheet
