LM2694 Datasheet | National Semiconductor

LM2694 30V, 600 m A Step Down Switching Regulator May 2006 LM2694 30V, 600 m A Step Down Switching Regulator General Description The LM2694 Step Down Switching Regulator Features all of the functions needed to implement a low cost, efficient, buck bias regulator capable of supplying 0.6A to the load. This buck regulator contains an N-Channel Buck Switch, and is available in the 3 x 3 thermally enhanced LLP-10 package and a TSSOP-14 package. The feedback regulation scheme requires no loop pensation, results in fast load transient response, and simplifies circuit implementation. The operating frequency remains constant with line and load variations due to the inverse relationship between the input voltage and .. the on-time. The valley current limit results in a smooth transition from constant voltage to constant current mode when current limit is detected, reducing the frequency and output voltage, without the use of foldback. Additional Features include: VCC under-voltage lockout, thermal shutdown, gate drive under-voltage lockout, and maximum duty cycle limiter. n No loop pensation required n Ultra-Fast transient response n Operating frequency remains constant with load current and input voltage variations n Maximum Duty Cycle Limited During Start-Up n Adjustable output voltage n Valley Current Limit At 0.6A n Maximum switching frequency: 1 MHz n Precision internal reference n Low bias current n Highly efficient operation n Thermal shutdown Typical Applications n High Efficiency Point-Of-Load (POL) Regulator n Non-Isolated Telemunication Buck Regulator n Secondary High Voltage Post Regulator Features n Integrated N-Channel buck switch n Integrated start-up regulator n Input Voltage Range: 8V to 30V Package n LLP-10 (3 mm x 3 mm) w/Exposed Pad n TSSOP-14 Basic Step Down Regulator © 2006 National Semiconductor Corporation DS201870 .national. Connection Diagrams 10-Lead LLP 14-Lead TSSOP...