Datasheet4U Logo Datasheet4U.com

LM5035A-1 - PWM Controller

This page provides the datasheet information for the LM5035A-1, a member of the LM5035A PWM Controller family.

Description

The LM5035A Half-Bridge Controller/Gate Driver contains all of the

Features

  • necessary to implement half-bridge topology power converters using voltage mode control with line voltage feed-forward. The LM5035A is a functional variant of the LM5035 half-bridge PWM controller. The VCC current limit threshold has been increased to 35 mA. The soft start and soft start currents have been increased from 50 µA to 100 µA. The BST UV threshold has been lowered to less than the VCC UV threshold. The ratio of the T1 and T2 delays on the SR1 and SR2 outputs has been increased from 2:.

📥 Download Datasheet

Datasheet preview – LM5035A-1

📁 Similar Datasheet

  • LM5035A - PWM Controller (Texas Instruments)
  • LM5035 - PWM Controller (Texas Instruments)
  • LM5035B - PWM Controller (Texas Instruments)
  • LM5035C - PWM Controller (Texas Instruments)
  • LM5030 - 100-V Push-Pull Current Mode PWM Controller (Texas Instruments)
  • LM5032 - High-Voltage Dual Interleaved Controller (Texas Instruments)
  • LM5033 - 100-V Push-Pull Voltage Mode PWM Controller (Texas Instruments)
  • LM5034 - High Voltage Dual Interleaved Controller (Texas Instruments)
  • LM5036 - Half-Bridge PWM Controller (Texas Instruments)
  • LM5037 - Dual-Mode PWM Controller (Texas Instruments)
Other Datasheets by National Semiconductor
  • LM5035A - PWM Controller
  • LM5035 - PWM Controller with Integrated Half-Bridge and SyncFET Drivers
  • LM5035B - PWM Controller
  • LM5030 - 100V Push-Pull Current Mode PWM Controller
  • LM5032 - High Voltage Dual Interleaved Current Mode Controller
  • LM5033 - 100V Push-Pull Voltage Mode PWM Controller
  • LM5034 - High Voltage Dual Interleaved Current Mode Controller
  • LM5037 - Dual-Mode PWM Controller

Full PDF Text Transcription

Click to expand full text
LM5035A/LM5035A-1 PWM Controller with Integrated Half-Bridge and SyncFET Drivers July 30, 2010 LM5035A/LM5035A-1 PWM Controller with Integrated Half-Bridge and SyncFET Drivers General Description The LM5035A Half-Bridge Controller/Gate Driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feed-forward. The LM5035A is a functional variant of the LM5035 half-bridge PWM controller. The VCC current limit threshold has been increased to 35 mA. The soft start and soft start currents have been increased from 50 µA to 100 µA. The BST UV threshold has been lowered to less than the VCC UV threshold. The ratio of the T1 and T2 delays on the SR1 and SR2 outputs has been increased from 2:1 to 3:1.
Published: |