Datasheet4U Logo Datasheet4U.com

LMD18201 - 3A / 55V H-Bridge

Description

The LMD18201 is a 3A H-Bridge designed for motion control applications.

The device is built using a multi-technology process which combines bipolar and CMOS control circuitry with DMOS power devices on the same monolithic structure.

Features

  • n Delivers up to 3A continuous output n Operates at supply voltages up to 55V n Low RDS(ON) typically 0.33Ω per switch Functional Diagram DS010793-1 FIGURE 1. Functional Block Diagram of LMD18201 © 1999 National Semiconductor Corporation DS010793 www. national. com Connection Diagram and Ordering Information DS010793-2 Top View Order Number LMD18201T See NS Package Number TA11B www. national. com 2 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, pl.

📥 Download Datasheet

Datasheet preview – LMD18201

📁 Similar Datasheet

  • LMD18201 - 55V H-Bridge (Texas Instruments)
  • LMD18200 - 55V H-Bridge (Texas Instruments)
  • LMD18200QML - 55V H-Bridge (Texas Instruments)
  • LMD18245 - 55V DMOS Full-Bridge Motor Driver (Texas Instruments)
  • LMD18400 - Quad High Side Driver (Texas Instruments)
  • LMD10 - Glass Passivated Bridge Rectifiers (GOOD-ARK)
  • LMD02 - Glass Passivated Bridge Rectifiers (GOOD-ARK)
  • LMD04 - Glass Passivated Bridge Rectifiers (GOOD-ARK)
  • LMD06 - Glass Passivated Bridge Rectifiers (GOOD-ARK)
  • LMD08 - Glass Passivated Bridge Rectifiers (GOOD-ARK)
Other Datasheets by National Semiconductor

Full PDF Text Transcription

Click to expand full text
LMD18201 3A, 55V H-Bridge April 1998 LMD18201 3A, 55V H-Bridge General Description The LMD18201 is a 3A H-Bridge designed for motion control applications. The device is built using a multi-technology process which combines bipolar and CMOS control circuitry with DMOS power devices on the same monolithic structure. The H-Bridge configuration is ideal for driving DC and stepper motors. The LMD18201 accommodates peak output currents up to 6A. Current sensing can be achieved via a small sense resistor connected in series with the power ground lead. For current sensing without disturbing the path of current to the load, the LMD18200 is recommended.
Published: |