Datasheet4U Logo Datasheet4U.com

LMV1012 - Pre-Amplified ICs for High Gain 2-Wire Microphones

General Description

The LMV1012 is an audio amplifier series for small form factor electret microphones.

This 2-wire portfolio is designed to replace the JFET amplifier currently being used.

Key Features

  • (Typical LMV1012-15, 2.2V supply, RL = 2.2 kΩ, C = 2.2 µF, VIN = 18 mVPP, unless otherwise specified) n Supply voltage 2V - 5V < 180 µA n Supply current n Signal to noise ratio (A-weighted) 60 dB n Output voltage noise (A-weighted).
  • 89 dBV n Total harmonic distortion 0.09% n Voltage gain.
  • LMV1012-07 7.8 dB.
  • LMV1012-15 15.6 dB.
  • LMV1012-20 20.9 dB.
  • LMV1012-25 23.8 dB n Temperature range.
  • 40˚C to 85˚C n Offered in 4-bump micro SMD packages Applic.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMV1012 LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) ETCTI
LMV1015 LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) ETCTI
LMV1024 PDM Output with Pre-Amplifier Texas Instruments
LMV1026 PDM Output with Pre-Amplifier Texas Instruments
LMV1031 LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) ETCTI

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LMV101 Fixed-Gain Amplifiers
LMV1015 Built-in Gain IC
LMV102 Fixed-Gain Amplifiers
LMV1022 PDM Output Pre-Amplifier
LMV1023 PDM Output Pre-Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LMV1012 Analog Series Pre-Amplified IC’s for High Gain 2-Wire Microphones August 2004 LMV1012 Analog Series: Pre-Amplified IC’s for High Gain 2-Wire Microphones General Description The LMV1012 is an audio amplifier series for small form factor electret microphones. This 2-wire portfolio is designed to replace the JFET amplifier currently being used. The LMV1012 series is ideally suited for applications requiring high signal integrity in the presence of ambient or RF noise, such as in cellular communications. The LMV1012 audio amplifiers are guaranteed to operate over a 2.2V to 5.0V supply voltage range with fixed gains of 7.8 dB, 15.6 dB, 20.9 dB, and 23.8 dB. The devices offer excellent THD, gain accuracy and temperature stability as compared to a JFET microphone.