LMV1026 - (LMV1024 / LMV1026) PDM Output

National Semiconductor

Datasheet Details

Part number	LMV1026
Manufacturer	National Semiconductor
File Size	1.16 MB
Description	(LMV1024 / LMV1026) PDM Output
Datasheet	LMV1026_NationalSemiconductor.pdf

National’s LMV1024 and LMV1026 stereo amplifiers are solutions for the new generation of voice enrichment capabilities.

(Typical VDD = 1.8V, CLOCK = 1.2 MHz, fINPUT = 1 kHz, VINPUT = 18 mVPP, unless otherwise specified) n Enhanced high-performance, full PDM output from the element n Stereo chipset and array routing n SNR A-weighted 59 dB n Digital A-weighted noise floor.
89 dBFS n Supply current 518 µA n Clock frequency 400 kHz to 2.4 MHz n Total harmonic distortion 0.03% n Power supply rejection ratio 100 dB n Adhesion technology > 1 kg n Highly integrated stereo or mono signaling n Maximized system perf.

📁 LMV1026 Similar Datasheet

LMV1012 - LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) (ETCTI)
LMV1015 - LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) (ETCTI)
LMV1031 - LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) (ETCTI)
LMV1032 - LMV1032-06/LMV1032-15/LMV1032-25 Amps for 3-Wire Analog Electret Microphones (Rev. G) (ETCTI)
LMV1088 - Dual Input Far Field Noise Suppression Microphone Amp w/Auto Cal (Rev. J) (ETCTI)
LMV1089 - Dual Input Far Field Noise Suppression Microphone Amp w/ Auto Calibration (Rev. H) (ETCTI)
LMV1090 - LMV1090 Dual Input Far Field Noise Suppression Microphone Amplifier (Rev. I) (ETCTI)
LMV1091 - LMV1091 Dual Input Far Field Noise Suppression Microphone Amplifier (Rev. C) (ETCTI)

Other Datasheets by National Semiconductor

Published: Dec 12, 2008 |