Datasheet4U Logo Datasheet4U.com

LP2995 - DDR Termination Regulator

General Description

The LP2995 linear regulator is designed to meet the JEDEC SSTL-2 and SSTL-3 specifications for termination of DDRSDRAM.

The device contains a high-speed operational amplifier to provide excellent response to load transients.

Key Features

  • n n n n n n n n Low output voltage offset Works with +5v, +3.3v and 2.5v rails Source and sink current Low external component count No external resistors required Linear topology Available in SO-8, PSOP-8 or LLP-16 packages Low cost and easy to use.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LP2995 DDR Termination Regulator Texas Instruments
LP2992 Micropower 250-mA Low-Noise Ultra-Low-Dropout Regulator Texas Instruments
LP2996 Termination Regulator Texas Instruments
LP2996-N Termination Regulator Texas Instruments
LP2996A Termination Regulator Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LP2992 Micropower 250mA Low-Noise Ultra Low-Dropout Regulator
LP2994 DDR Termination Regulator
LP2996 DDR Termination Regulator
LP2997 DDR-II Termination Regulator
LP2902 Micropower Quad Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LP2995 DDR Termination Regulator July 2003 LP2995 DDR Termination Regulator General Description The LP2995 linear regulator is designed to meet the JEDEC SSTL-2 and SSTL-3 specifications for termination of DDRSDRAM. The device contains a high-speed operational amplifier to provide excellent response to load transients. The output stage prevents shoot through while delivering 1.5A continuous current and transient peaks up to 3A in the application as required for DDR-SDRAM termination. The LP2995 also incorporates a VSENSE pin to provide superior load regulation and a VREF output as a reference for the chipset and DDR DIMMS. Patents Pending Features n n n n n n n n Low output voltage offset Works with +5v, +3.3v and 2.