NCP1086 Datasheet 1.5A Adjustable and 3.3V Fixed Output Linear Regulator

Manufacturer: ON

Datasheet Details

Part number	NCP1086
Manufacturer	ON
File Size	184.10 KB
Description	1.5A Adjustable and 3.3V Fixed Output Linear Regulator
Datasheet	NCP1086 Datasheet

NCP1086 1.5 A Adjustable and 3.3 V Fixed Output Linear Regulator The NCP1086 linear regulator provides 1.5 A at 3.3 V or adjustable output voltage.

The adjustable output voltage device uses two external resistors to set the output voltage within a 1.25 V to 5.5 V range.

The regulators is intended for use as post regulator and microprocessor supply.

Output Current to 1.5 A.
Output Accuracy to ±1% Over Temperature.
Dropout Voltage (Typical) 1.05 V @ 1.5 A.
Fast Transient Response.
Fault Protection Circuitry.
Current Limit.
Thermal Shutdown.
Pb.
Free Packages are Available http://onsemi. com 12 3 123 12 3 TO.
220.
3 T SUFFIX CASE 221A Adjustable Output Tab = VOUT Pin 1. Adj 2. VOUT 3. VIN D2PAK.
3 DP SUFFIX CASE 418AB SOT.
223 ST SU.

Part Number	Description
NCP1030	Integrated DC-DC Converter
NCP1031	Integrated DC-DC Converter
NCP1212	Current Mode PWM Controller
NCP1215	Low Cost Variable OFF Time Switched Mode Power Supply Controller
NCP1216	PWM Current-Mode Controller
NCP1225	Low Standby Power SMPS Controller
NCP1232	Microprocessor Monitor
NCP1280	Active Clamp Voltage Mode PWM Controller
NCP1410	250 mA Sync-Rect PFM Step-Up DC-DC Converter
NCP1411	Sync-Rect PFM Step-Up DC-DC Converter