Datasheet4U Logo Datasheet4U.com

ADM1034 Datasheet Thermal Monitor and Fan Speed (RPM) Controller

Manufacturer: onsemi

Overview: ADM1034 Thermal Monitor and Fan Speed (RPM) Controller The ADM1034 is a dual-channel remote- and local-temperature sensor and fan controller. The remote channels monitor the temperature of two remote thermal diodes, which may be discrete 2N3904/6s or may be located on a microprocessor die. The device also monitors its own ambient temperature. The ADM1034 can monitor and control the speed of two cooling fans. The user can program a target fan speed, or else use the look-up table to input a temperature-to-fan speed profile. The look-up table can be configured to run the fans at discrete speeds (discrete mode) or to ramp the fan speed with temperature (linear mode). The ADM1034 communicates over a 2-wire SMBus 2.0 interface. An 8-level LOCATION input allows the user to choose between SMBus 1.1 and SMBus 2.0. An ALERT output indicates error conditions. The THERM I/O signals overtemperature as an output and times THERM assertions as an input. Pin 8 can be configured as a reference for the THERM (PROCHOT) input.

Datasheet Details

Part number ADM1034
Manufacturer onsemi
File Size 419.67 KB
Description Thermal Monitor and Fan Speed (RPM) Controller
Download ADM1034 Download (PDF)

Key Features

  • 1 Local and 2 Remote Temperature Channels.
  • 1C Accuracy on Local and Remote Channels.
  • Automatic Remote Temperature Channels, Up to 1 kW.
  • Fast (Up to 64 Measurements per Second).
  • SMBus 2.0, 1.1, and 1.0 Compliant.
  • SMBus Address Input/.