Datasheet4U Logo Datasheet4U.com

CS8156 - Low Dropout Dual Regulator

Description

PACKAGE LEAD # 5 Lead TO

220 1 2 3 4 5 LEAD SYMBOL VIN VOUT1 GND ENABLE VOUT2 FUNCTION Supply voltage, usually direct from battery.

Regulated output 12 V, 750 mA (typ).

Ground connection.

Features

  • http://onsemi. com TO.
  • 220 FIVE LEAD T SUFFIX CASE 314D 1 5 TO.
  • 220 FIVE LEAD TVA SUFFIX CASE 314K.
  • Two Regulated Outputs.
  • 12 V ±5.0%; 750 mA.
  • 5.0 V ±2.0%; 100 mA.
  • Very Low SLEEP Mode Current Drain 200 nA.
  • Fault Protection.
  • Reverse Battery.
  • +60 V,.
  • 50 V Peak Transient Voltage.
  • Short Circuit.
  • Thermal Shutdown.
  • CMOS Compatible ENABLE.
  • Pb.
  • Free Packages are Available 1.

📥 Download Datasheet

Datasheet Details

Part number CS8156
Manufacturer onsemi
File Size 120.37 KB
Description Low Dropout Dual Regulator
Datasheet download datasheet CS8156 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS8156 12V/ 5V Low Dropout Dual Regulator with ENABLE Cherry Semiconductor Corporation
CS8151 100mA Low Dropout Linear Regulator Cherry Semiconductor Corporation
CS8151C 5V 100mA Low Dropout Linear Regulator Cherry Semiconductor Corporation
CS8101 100mA Low Dropout Linear Regulator Cherry Semiconductor Corporation
CS810N3A TRIACS JILIN SINO

Other Datasheets by onsemi

Part Number Description
CS8151 100mA Low Dropout Linear Regulator
CS8151C 100mA Low Dropout Linear Regulator
CS8101 Low Dropout Linear Regulator
CS8120 Linear Regulator
CS8122 Low Dropout Linear Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com CS8156 12 V, 5.0 V Low Dropout Dual Regulator with ENABLE The CS8156 is a low dropout 12 V/5.0 V dual output linear regulator. The 12 V ±5.0% output sources 750 mA and the 5.0 V ±2.0% output sources 100 mA. The on board ENABLE function controls the regulator’s two outputs. When the ENABLE lead is low, the regulator is placed in SLEEP mode. Both outputs are disabled and the regulator draws only 200 nA of quiescent current. The regulator is protected against overvoltage conditions. Both outputs are protected against short circuit and thermal runaway conditions. The CS8156 is packaged in a 5 lead TO−220 with copper tab. The copper tab can be connected to a heat sink if necessary. Features http://onsemi.
Published: |