NC7SZ11 Datasheet | onsemi

Tiny Logic UHS Three-Input AND Gate Description The NC7SZ11 is a single three- input AND Gate from onsemi’s Ultra- High Speed Series of Tiny Logic. The device is fabricated with advanced CMOS technology to achieve ultra- high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65 V to 5.5 V VCC operating range. The inputs and output are high impedance when VCC is 0 V. Inputs tolerate voltages up to 5.5 V independent of VCC operating voltage. Features - Ultra- High Speed: t PD = 2.9 ns (Typical) into 50 p F at 5 V VCC - High Output Drive: ±24 m A at 3 V VCC - Broad VCC Operating Range: 1.65 V to 5.5 V - Power Down High Impedance Inputs / Outputs - Over- Voltage Tolerance Inputs Facilitate 5 V to 3 V Translation - Proprietary Noise / EMI Reduction Circuitry - Ultra- Small Micro Pak™ Packages - Space- Saving SC70 Package - These Devices are Pb- Free, Halogen Free/BFR Free and are Ro HS pliant IEEC / IEC & Figure 1. Logic Symbol DATA SHEET .onsemi. MARKING DIAGRAMS SIP6 1.45x1.0 CASE 127EB Pin 1 E7KK XYZ SC- 88 CASE 419B- 02 Z11M G G E7, Z11 KK XY Z M G = Specific Device Code = 2- Digit Lot Run Traceability Code = 2- Digit Date Code Format = Assembly Plant Code = Date Code- = Pb- Free Package (Note: Microdot may be in either location) - Date Code orientation and/or position may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 5 of this data sheet. © Semiconductor ponents Industries, LLC,...