Description
Pin Name
No.I/O/x
Description
VIN
1
I
Input signal to control the output.In applications which require galvanic isolation, VIN is generat-
ed at the opto output, the pulse transformer secondary or the digital isolator output.VO (VOH/
VOL) signal is in phase with VIN.VIN is internally clamped to GND and has a pull.
down resistor
of 1 MW to ensure that an output is low in the absence of an input signal.A minimum pulse.
width is required at VIN before VO (VOH/VOL) is.
Features
- include accurate Under.
- voltage.
- lockout (UVLO), desaturation protection (DESAT) and Active open.
- drain FAULT output. The drivers also feature an accurate 5.0 V output. The drivers are designed to accommodate a wide voltage range of bias supplies. NCx5707B accommodates bipolar voltages. Depending on the pin configuration the devices also include Active Miller Clamp (NCx5707A) and separate high and low (VOH and VOL) driver outputs for system design convenience (NCx5707C). All.
