NCD57530 - Isolated Dual Channel IGBT Gate Driver

Product Overview

ON Semiconductor

Datasheet Details

Part number	NCD57530
Manufacturer	ON Semiconductor
File Size	814.39 KB
Description	Isolated Dual Channel IGBT Gate Driver
Datasheet	NCD57530 Datasheet
Additional preview pages of the NCD57530 datasheet.

Product details

Description

Pin Name No.I/O Description INA INB VDDI 1 Input A non-inverting gate driver input that defines OUTA.It has an equivalent pull down resistor of 125 kW to ensure that output is low in the absence of an input signal.A positive or negative going pulse with pulse width longer than maximum value of tMIN2 is required at INA before OUTA reacts.The input logic levels scale with VDDI up to VDDI = 5 V.With VDDI above 5 V the input logic levels stay the same as for VDDI = 5 V.Maxim

Features

High Peak Output Current (±6.5 A).
Configurable as a Dual Low.
Side or Dual High.
Side or Half.
Bridge Driver.
Programmable Overlap or Dead Time control.
Disable Pin to Turn Off Outputs for Power Sequencing (NCx57540).
Enable Pin for Independent Driver Control (NCx57530).
IGBT Gate Clamping during Short Circuit.
Short Propagation Delays with Accurate Matching.
Tight UVLO Thresholds on all Power Supplies.

📁 Similar Datasheet

NCD1015ZG - Read-Only RFID Transponder (IXYS)
NCD1015ZP - Read-Only RFID Transponder (IXYS)
NCD103K500Y5PKTB - Ceramic Disc Capacitors (NIC Components)
NCD104M50Z5UF - Ceramic Disc Capacitors (NIC Components)
NCD2100 - Digital Programmable Capacitor (IXYS)
NCD2400M - Non-volatile Digital Programmable Capacitor (IXYS)

Other Datasheets by ON Semiconductor

NCD57540 - Isolated Dual Channel IGBT Gate Driver
NCD5700 - High Current IGBT Gate Driver
NCD57000 - Isolated High Current IGBT Gate Driver
NCD57001 - Isolated High Current IGBT Gate Driver
NCD57001F - High Current IGBT Gate Driver
NCD5701A - High Current IGBT Gate Drivers

Published: Nov 20, 2022 |