Download the NCD57540 datasheet PDF.
This datasheet also covers the NCD57530 variant, as both devices belong to the same isolated dual channel igbt gate driver family and are provided as variant models within a single manufacturer datasheet.
General Description
No.
Input A non-inverting gate driver input that defines OUTA.
ensure that output is low in the absence of an input signal.
Key Features
High Peak Output Current (±6.5 A).
Configurable as a Dual Low.
Side or Dual High.
Side or Half.
Bridge
Driver.
Programmable Overlap or Dead Time control.
Disable Pin to Turn Off Outputs for Power Sequencing (NCx57540).
Enable Pin for Independent Driver Control (NCx57530).
Full PDF Text Transcription for NCD57540 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
NCD57540. For precise diagrams, and layout, please refer to the original PDF.
DATA SHEET www.onsemi.com Isolated Dual Channel IGBT Gate Driver NCD57530, NCV57530, NCD57540, NCV57540 1 SOIC−16 WB CASE 752AJ NCx575y0 are high−current two channel isol...
View more extracted text
540 1 SOIC−16 WB CASE 752AJ NCx575y0 are high−current two channel isolated IGBT gate drivers with 5 kVrms internal galvanic isolation from input to each output and functional isolation between the two output channels. The device accepts 3.3 V to 20 V bias voltage and signal levels on the input side and up to 32 V bias voltage on the output side. The device accepts complementary inputs and offers separate pins for Disable (NCx57540) or Enable (NCx57530) and Dead Time control for system design convenience. Drivers are available in CASE 752AJ SOIC−16 wide body package with increased insulation between channels (less pin 12 &
NCD57540 Datasheet
