NCP1015 - Self-Supplied Monolithic Switcher

ON Semiconductor

NCP1015 Datasheet Preview — Preview of NCP1015 PDF

Datasheet Details

Part number	NCP1015
Manufacturer	ON Semiconductor ↗
File Size	402.76 KB
Description	Self-Supplied Monolithic Switcher
Datasheet	NCP1015-ONSemiconductor.pdf

NCP1015 Product details

Description

Pin No. 223 PDIP 7 Pin Name 1 1 VCC 2 NC 3 GND 2 4 FB 3 5 DRAIN 7 GND 4 8 GND Function Powers the Internal Circuitry The IC Ground Feedback Signal Input Drain Connection The IC Ground The IC Ground Description This pin is connected to an external capacitor of typically 10 mF.The natural ripple superimposed on the VCC participates to the frequency jittering.For improved standby performance

Features

Built.
in 700 V MOSFET with typical RDS(on) of 11 W.
Large Creepage Distance between High.
voltage Pins.
Current.
mode Fixed Frequency Operation: 65 kHz.
100 kHz.
Skip.
cycle Operation at Low Peak Currents Only: No Acoustic Noise!.
Dynamic Self.
Supply, No Need for an Auxiliary Winding.
Internal 1 ms Soft.
start.
Auto.
recovery Internal Output Short.
circuit Protection.

📁 NCP1015 Similar Datasheet

NCP1030 - Integrated DC-DC Converter (ON)
NCP1031 - Integrated DC-DC Converter (ON)
NCP1086 - 1.5A Adjustable and 3.3V Fixed Output Linear Regulator (ON)
NCP1212 - Current Mode PWM Controller (ON)
NCP1215 - Low Cost Variable OFF Time Switched Mode Power Supply Controller (ON)
NCP1216 - PWM Current-Mode Controller (ON)
NCP1225 - Low Standby Power SMPS Controller (ON)
NCP1232 - Microprocessor Monitor (ON)

Other Datasheets by ON Semiconductor

NCP1010 - Self-Supplied Monolithic Switcher
NCP1011 - Self-Supplied Monolithic Switcher
NCP1012 - Self-Supplied Monolithic Switcher
NCP1013 - Self-Supplied Monolithic Switcher
NCP1014 - Self-Supplied Monolithic Switcher
NCP100 - Sub 1.0V Precision Adjustable Shunt Regulator

Published: Jan 24, 2015 |