Datasheet4U Logo Datasheet4U.com

NCP1249D Datasheet High-voltage Current-mode Pwm Controller

Manufacturer: onsemi

Overview: NCP1249C, NCP1249D High-Voltage Current­Mode PWM Controller Featuring Peak Power Excursion and Self-Relaxing Off Mode The NCP1249 is a highly integrated high−voltage PWM controller http://onsemi. capable of delivering a rugged and high performance offline power supply with extremely low no−load consumption. With a supply range MARKING DIAGRAM up to 30 V, the controller hosts a jittered 65 kHz switching circuitry operated in peak current mode control. When the power on the secondary side starts to decrease, the controller automatically folds back its switching frequency down to a minimum level of 26 kHz. As the power further goes down, the part enters skip cycle while freezing the peak current setpoint.

This datasheet includes multiple variants, all published together in a single manufacturer document.

Key Features

  • several key 9 1 SOIC.
  • 9 NB D SUFFIX CASE 751BP 9 NCP1249x65 ALYW G 1 protective features: a internal brown.
  • out, a non.
  • dissipative Over Power Protection for a constant maximum output current regardless of the input voltage and two latched over voltage protection inputs.
  • either through a dedicated pin or via the VCC input. The controller architecture is arranged to authorize a transient peak power excursion when the peak current hits the limit. At this point, the.

More Datasheets from onsemi

Part Number Description
NCP1249 High-Voltage Current-Mode PWM Controller
NCP1249C High-Voltage Current-Mode PWM Controller
NCP1240 Fixed Frequency Current-Mode Controller
NCP12400 Fixed Frequency Current-Mode Controller
NCP1244 Fixed Frequency Controller
NCP1246 Fixed Frequency Controller
NCP1247 Fixed Frequency Controller
NCP1248 Fixed Frequency Current Mode Controller
NCP120 Very Low Dropout Bias Rail CMOS Voltage Regulator
NCP1200 PWM Current-Mode Controller

NCP1249D Distributor