Datasheet4U Logo Datasheet4U.com

NCP1592 - Synchronous Buck PWM Switcher

General Description

Pin No.

Description Analog ground.

start capacitor.

VBIAS capacitor, RT resistor, and SYNC pin.

Key Features

  • include: a high performance voltage error amplifier; an under.
  • voltage.
  • lockout circuit to prevent start.
  • up until the input voltage reaches 3 V; an internally or externally programmable soft.
  • start circuit to limit inrush currents; and a power good output monitor signal. NCP1592 is available in thermally enhanced 28.
  • pin TSSOP package. Features.
  • 30 mW, 12 A Peak MOSFET Switches for High to Efficiency at 6 A Continuous Output Source or Sink Current.

📥 Download Datasheet

Datasheet Details

Part number NCP1592
Manufacturer onsemi
File Size 640.64 KB
Description Synchronous Buck PWM Switcher
Datasheet download datasheet NCP1592 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP1500 Dual Mode PWM/Linear BUCK Converter ON
NCP1530 600mA PWM/PFM Step-Down Converter ON
NCP1550 600 kHz PWM/PFM Step-Down DC-DC Controller ON
NCP1560 Full Featured Voltage Mode PWM Controller ON
NCP15WB333E03RC Thermistors Murata

Other Datasheets by onsemi

Part Number Description
NCP1593A Synchronous Buck Regulator
NCP1593B Synchronous Buck Regulator
NCP1594A Buck Converter
NCP1594B Buck Converter
NCP1595 Current Mode PWM Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP1592 Synchronous Buck PWM Switcher - Integrated FETs 6A NCP1592 is a low input voltage 6 A synchronous buck converter that integrates both 30 mW high side and low side MOSFETs. NCP1592 is designed for space sensitive and high efficiency applications. The main features include: a high performance voltage error amplifier; an under−voltage−lockout circuit to prevent start−up until the input voltage reaches 3 V; an internally or externally programmable soft−start circuit to limit inrush currents; and a power good output monitor signal. NCP1592 is available in thermally enhanced 28−pin TSSOP package. Features • 30 mW, 12 A Peak MOSFET Switches for High to Efficiency at 6 A Continuous Output Source or Sink Current • Adjustable Output Voltage Down to 0.891 V With 1.