NCP1593A - Synchronous Buck Regulator

Product Overview

ON Semiconductor

Datasheet Details

Part number	NCP1593A
Manufacturer	ON Semiconductor
File Size	479.46 KB
Description	Synchronous Buck Regulator
Datasheet	NCP1593A Datasheet
Additional preview pages of the NCP1593A datasheet.

Product details

Description

Pin No Symbol 1 NC / LX 2, 3 LX 4 PG 5 EN 6 FB 7 SS / NC 8 9, 10 EP VCC VCCP GND Figure 1. Block Diagram Description No connect pin for NCP1593A.The user may ground this pin or leave it floating./ LX pin for NCP1593B The drains of the internal MOSFETs.The output inductor should be connected to these pins.Open drain output from the Power Good logic.When the FB voltage is within regulation, this is a high impedance pin.Otherwise it is pulled low.Logic input to enable the part.L

Features

include cycle.
by.
cycle current limiting, 100% duty cycle operation, short.
circuit protection, power saving mode and thermal shutdown. Features.
Wide Input Voltage Range: from 4.0 V to 5.5 V.
Internal 90 mW High.
Side P.
Channel MOSFET and 60 mW Low.
Side N.
Channel MOSFET.
Fixed 1 MHz Switching Frequency.
Cycle.
by.
Cycle Current Limiting.
Hiccup Mode Short.
Circuit Protection.

📁 Similar Datasheet

NCP1500 - Dual Mode PWM/Linear BUCK Converter (ON)
NCP1530 - 600mA PWM/PFM Step-Down Converter (ON)
NCP1550 - 600 kHz PWM/PFM Step-Down DC-DC Controller (ON)
NCP1560 - Full Featured Voltage Mode PWM Controller (ON)
NCP15WB333E03RC - Thermistors (Murata)
NCP15WB333J03RC - Thermistors (Murata)
NCP15WB333x03RC - NTC Thermistors (Murata)
NCP15WB333x03RC - Thermistors (Murata)

Other Datasheets by ON Semiconductor

NCP1593B - Synchronous Buck Regulator
NCP1592 - Synchronous Buck PWM Switcher
NCP1594A - Buck Converter
NCP1594B - Buck Converter
NCP1595 - Current Mode PWM Converter
NCP1595A - Current Mode PWM Converter

Published: Nov 7, 2013 |