Datasheet4U Logo Datasheet4U.com

NCP432 Datasheet 1.5A Ultra-Small Controlled Load Switch

Manufacturer: onsemi

📥 Download Datasheet

Datasheet Details

Part number NCP432
Manufacturer onsemi
File Size 116.21 KB
Description 1.5A Ultra-Small Controlled Load Switch
Datasheet download datasheet NCP432 Datasheet

General Description

Pin Name Pin Number Type IN A2 POWER GND EN OUT B1 POWER B2 INPUT A1 OUTPUT Description Load−switch input voltage;

connect a 1 mF or greater ceramic capacitor from IN to GND as close as possible to the IC.

Ground connection.

Overview

NCP432, NCP433 1.5A Ultra-Small Controlled Load Switch with Auto-Discharge Path The NCP432 and NCP433 are a low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy.

Indeed, due to a current consumption optimization with PMOS structure, leakage currents are eliminated by isolating connected IC’s on the battery when not used.

Output discharge path is also embedded to eliminate residual voltages on the output (NCP433 only).

Key Features

  • 1 V.
  • 3.6 V Operating Range.
  • 50 mW P MOSFET at 1.8 V.
  • DC Current up to 1.5 A.
  • Output Auto.
  • discharge (NCP433).
  • Active High EN Pin.
  • WLCSP4 0.76 x 0.76 mm.
  • These Devices are Pb.
  • Free, Halogen Free/BFR Free and are RoHS Compliant Typical.

More Datasheets from onsemi

Part Number Description
NCP4326 Secondary Controller
NCP4328 Secondary Side CV/CC Controller
NCP432B Programmable Precision References
NCP4300A Dual Operational Amplifier and Voltage Reference
NCP4302 Synchronous Rectification Controller
NCP4303A Secondary Side Synchronous Rectification Driver
NCP4303B Secondary Side Synchronous Rectification Driver
NCP4304A Secondary Side Synchronous Rectification Driver
NCP4304B Secondary Side Synchronous Rectification Driver
NCP4305 Secondary Side Synchronous Rectification Driver