Datasheet4U Logo Datasheet4U.com

NCP436 Datasheet 3A Ultra-Small Controlled Load Switch

Manufacturer: onsemi

📥 Download Datasheet

Datasheet Details

Part number NCP436
Manufacturer onsemi
File Size 92.51 KB
Description 3A Ultra-Small Controlled Load Switch
Datasheet download datasheet NCP436 Datasheet

General Description

Pin Name Pin Number Type IN A2, B2 POWER GND EN OUT C1 C2 A1, B1 POWER INPUT OUTPUT Description Load−switch input voltage;

connect a 1 mF or greater ceramic capacitor from IN to GND as close as possible to the IC.

Ground connection.

Overview

NCP436, NCP437 3A Ultra-Small Controlled Load Switch with Auto-Discharge Path The NCP436 and NCP437 are very low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy.

Indeed, due to a current consumption optimization with PMOS structure, leakage currents are eliminated by isolating connected IC on the battery when not used.

Output discharge path is also embedded to eliminate residual voltages on the output rail for the NCP437 part only.

Key Features

  • 1.0 V.
  • 3.6 V Operating Range.
  • 20 mW P MOSFET at 3.6 V.
  • DC Current Up to 3 A.
  • Output Auto.
  • discharge.
  • Active High EN Pin.
  • WLCSP6 1 x 1.5 mm.
  • These are Pb.
  • Free Devices Typical.

More Datasheets from onsemi

Part Number Description
NCP4300A Dual Operational Amplifier and Voltage Reference
NCP4302 Synchronous Rectification Controller
NCP4303A Secondary Side Synchronous Rectification Driver
NCP4303B Secondary Side Synchronous Rectification Driver
NCP4304A Secondary Side Synchronous Rectification Driver
NCP4304B Secondary Side Synchronous Rectification Driver
NCP4305 Secondary Side Synchronous Rectification Driver
NCP4306 Secondary Side Synchronous Rectification Driver
NCP4307 Secondary Side Synchronous Rectification Driver
NCP4308 Synchronous Rectifier Controller