Datasheet4U Logo Datasheet4U.com

NCP59152 - VLDO Fast Transient Response Regulator

General Description

Pin Number Pin Number D2PAK

1 2 EN Enable Input: CMOS and TTL logic compatible.

Logic high = enable; Logic low = shutdown.

2 3 VIN Input voltage which supplies both the internal circuitry and the current to the output load.

T

Key Features

  • consist of output current limiting, built.
  • in thermal shutdown and reverse output current protection. Logic level enable and error flag pins are available on the 5.
  • pin and 8.
  • pin versions. The NCP59152 is an Adjustable voltage device and is available in D2PAK.
  • 5 and DFN8 packages. Features.
  • Output Current in Excess of 1.5 A.
  • 300 mV Typical Dropout Voltage at 1.5 A.
  • Adjustable Output Voltage.
  • Low Ground Current.
  • Fast Transi.

📥 Download Datasheet

Datasheet Details

Part number NCP59152
Manufacturer onsemi
File Size 160.37 KB
Description VLDO Fast Transient Response Regulator
Datasheet download datasheet NCP59152 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP500 150mA CMOS Low Noise Low-Dropout Voltage Regulator ON
NCP5007 Compact Backlight LED Boost Driver ON
NCP511 Low-Dropout Voltage Regulator ON
NCP51752 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCP5203 2-in-1 DDR Power Controller ON

Other Datasheets by onsemi

Part Number Description
NCP59150 VLDO Fast Transient Response Regulator
NCP59151 VLDO Fast Transient Response Regulator
NCP5911 IMVP7.0 Compatible Synchronous Buck MOSFET Driver
NCP590 Ultra Low Dropout CMOS LDO
NCP5901 VR12 Compatible Synchronous Buck MOSFET Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP59152 1.5 A, Very Low-Dropout (VLDO) Fast Transient Response Regulator The NCP59152 is a high precision, very low dropout (VLDO), low ground current positive voltage regulator that is capable of providing an output current in excess of 1.5 A with a typical dropout voltage lower than 300 mV at 1.5 A load current. The device is stable with ceramic output capacitors. The NCP59152 device can withstand up to 18 V max input voltage. Internal protection features consist of output current limiting, built−in thermal shutdown and reverse output current protection. Logic level enable and error flag pins are available on the 5−pin and 8−pin versions. The NCP59152 is an Adjustable voltage device and is available in D2PAK−5 and DFN8 packages. Features • Output Current in Excess of 1.