NCS32100
Features
- Provides Absolute Position Output with Programmable Index
- Provides Temperature and Backup Battery Measurements
- Supports Connection to an RS- 485 Driver (2.5 Mbps)
- Maximum Speed at Full Accuracy: 6000 rpm
- Maximum Speed at Reduced Accuracy: 60,000 rpm
- Supply Voltage Range: 2.75 V
- 5.5 V
- Interface level shifting from 2.7 V to 5.5 V
- Low Power Battery Mode Consumption: 2 m A (Typical)-
- Full Operation Current Consumption 80 m A (Typical)
- Internal Programmable M0- ARM MCU Provides Data Interface,
Configuration, NVM, and Calibration Features
- This Device is Pb- Free and is Ro HS pliant
Typical Applications
- Industrial Automation / Robotics
- Motor Control / Positioning
- Servo Applications
- Battery mode consumption is based on wakeup duty cycle timing defined by firmware
© Semiconductor ponents Industries, LLC, 2022
November, 2025
- Rev. 6
DATA SHEET .onsemi.
SENSOR DEPENDENT METRICS (Note 1)
Accuracy ±50 arcsec or better
PCB Sensor
OD: 37.5 mm ID: 8 mm
1....
