Datasheet4U Logo Datasheet4U.com

NCV361 - USB Positive Overvoltage Protection Controller

Datasheet Summary

Description

Pin No.

1 EN INPUT Enable Pin.

The device enters in shutdown mode when this pin is tied to a high level.

Features

  • Overvoltage Protection up to 20 V.
  • On.
  • chip PMOS Transistor.
  • Overvoltage Lockout (OVLO).
  • Undervoltage Lockout (UVLO).
  • Overcurrent Protection.
  • Alert FLAG Output.
  • EN Enable Pin.
  • Thermal Shutdown.
  • Compliance to IEC61000.
  • 4.
  • 2 (Level 4) 8 kV (Contact) 15 kV (Air).
  • ESD Ratings: Machine Model = B ESD Ratings: Human Body Model = 2.
  • UDFN6 2x2 mm and TSOP.
  • 5 3x3 mm Packages.

📥 Download Datasheet

Datasheet preview – NCV361

Datasheet Details

Part number NCV361
Manufacturer ON Semiconductor
File Size 342.11 KB
Description USB Positive Overvoltage Protection Controller
Datasheet download datasheet NCV361 Datasheet
Additional preview pages of the NCV361 datasheet.

📁 Similar Datasheet

  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
Other Datasheets by ON Semiconductor
  • NCV360 - USB Positive Overvoltage Protection Controller
  • NCV3011 - Synchronous PWM Controller
  • NCV3020A - Synchronous PWM Controller
  • NCV3020B - Synchronous PWM Controller
  • NCV3030A - Synchronous PWM Controller
  • NCV3030B - Synchronous PWM Controller
  • NCV3063 - Step-Up/Down/Inverting Switching Regulators
  • NCV3064 - Switching Regulator

Full PDF Text Transcription

Click to expand full text
NCP361, NCV361 USB Positive Overvoltage Protection Controller with Internal PMOS FET and Overcurrent Protection The NCP361 disconnects systems at its output when wrong VBUS operating conditions are detected at its input. The system is positive over−voltage protected up to +20 V. Thanks to an integrated PMOS FET, no external device is necessary, reducing the system cost and the PCB area of the application board. The NCP361 is able to instantaneously disconnect the output from the input if the input voltage exceeds the overvoltage threshold (5.675 V). Thanks to an overcurrent protection, the integrated PMOS is turning off when the charge current exceeds current limit (see options in ordering information).
Published: |