NCV4299C - 150mA Low-Dropout Voltage Regulator

Product Overview

ON Semiconductor

Datasheet Details

Part number	NCV4299C
Manufacturer	ON Semiconductor
File Size	379.91 KB
Description	150mA Low-Dropout Voltage Regulator
Datasheet	NCV4299C Datasheet
Additional preview pages of the NCV4299C datasheet.

Product details

Description

SO 8 PACKAGE Pin Symbol Description 1 I Input.Battery Supply Input Voltage.Bypass directly to GND with ceramic capacitor.2 SI Sense Input.Can provide an early warning signal of an impending reset condition when used with SO.Connect to Q if not used.3 RADJ Reset Adjust.Use resistor divider to Q to adjust reset threshold lower.Connect to GND if not used.4 D Reset Delay.Connect external capacitor to ground to set delay time.5 GND Ground.6 RO Reset

Features

microprocessor interfaces including an adjustable reset output and adjustable system monitor to provide shutdown early warning. An inhibit function is available. With inhibit active, the regulator turns off and the device consumes less than 1.0 mA of quiescent current. The part can withstand load dump transients making it suitable for use in automotive environments. Features.
5.0 V, 3.3 V ±2%, 150 mA.
Extremely Low Current Consumption.
80 mA (Typ) in the ON Mode.

📁 Similar Datasheet

NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
NCV2902 - Single Supply Quad Operational Amplifiers (ON)
NCV3025833 - Smart Power Stage (onsemi)
NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
NCV551 - Low-Dropout Voltage Regulator (ON)
NCV70628 - Micro-stepping Motor Driver (onsemi)
NCV7383 - Transceiver (ON Semiconducto)

Other Datasheets by ON Semiconductor

NCV4299 - Low-Dropout Voltage Regulator
NCV4299A - 150mA Low-Dropout Voltage Regulator
NCV4290 - 450mA Low Drop Voltage Regulator
NCV4294C - Low Drop Voltage Regulator
NCV4296-2C - Voltage Regulator
NCV4250-2C - Low Dropout Voltage Tracking Regulator

Published: Feb 4, 2016 |