Datasheet4U Logo Datasheet4U.com

NCV51400 - 3Amp Termination Regulator

General Description

VTT External Reference Input ( set to VDDQ / 2 thru resistor network ).

Power input.

Internally connected to the output source MOSFET.

Key Features

  • For Automotive.

📥 Download Datasheet

Datasheet Details

Part number NCV51400
Manufacturer onsemi
File Size 241.71 KB
Description 3Amp Termination Regulator
Datasheet download datasheet NCV51400 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV51153 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCV51563 4.5-A/9-A Isolated Dual Channel Gate Driver onsemi
NCV551 Low-Dropout Voltage Regulator ON
NCV2902 Single Supply Quad Operational Amplifiers ON
NCV3025833 Smart Power Stage onsemi

Other Datasheets by onsemi

Part Number Description
NCV51411 Low Voltage Buck Regulator
NCV51460 20mA Micropower Precision Voltage Reference
NCV5104 Half Bridge Driver
NCV5106A 600V Automotive High and Low Side Driver
NCV5106B 600V Automotive High and Low Side Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com 3 Amp VTT Termination Regulator DDR1, DDR2, DDR3, LPDDR3, DDR4 NCP51400, NCV51400 The NCP51400 is a source/sink Double Data Rate (DDR) termination regulator specifically designed for low input voltage and low−noise systems where space is a key consideration. The NCP51400 maintains a fast transient response and only requires a minimum output capacitance of 20 mF. The NCP51400 supports a remote sensing function and all power requirements for DDR VTT bus termination. The NCP51400 can also be used in low−power chipsets and graphics processor cores that require dynamically adjustable output voltages. The NCP51400 is available in the thermally−efficient DFN10 Exposed Pad package, and is rated both Green and Pb−free.