NCV59745 Datasheet | onsemi

Description The NCV59745 is very low dropout low noise dual- rail voltage regulator that is capable of providing an output current in excess of 3.0 A with a dropout voltage of 115 m V typ. at full load current. This series contains fixed output voltage devices. The high output current capability with high accuracy, broad bandwidth high PSRR and low noise makes this VLDOs ideal for powering noise sensitive high speed munication devices, high end FPGAs and microprocessors. The NCV59745 is offered in QFNW20 4.0 mm x 4.0 mm package. Features - Output Current in Excess of 3.0 A - 0.25% Typical Accuracy Over Line and Load - VIN Range: 0.8 V to 5.5 V - VBIAS Range: 2.2 V to 5.5 V - Output Voltage Range: 0.8 V to 3.6 V - Dropout Voltage: 105 m V typ. at 3 A - Programmable Soft Start - Open Drain Power Good Output - Low Noise, 6 m VRMS Typically - Excellent Transient Response - NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable - These are Pb- Free Devices, Wettable Flank for AOI Applications - High Speed Analog VCO, DAC, ADC - FPGAs, DSPs, Ser Des - Imaging Sensors and ASICs - Automotive, Tele and Industrial Equipment Point of Load Regulation V IN CIN V BIAS C BIAS C SS BIAS OUT VOUT C OUT Figure 1. Typical Application Schematic .onsemi. QFNW20 MW SUFFIX CASE 484AP MARKING DIAGRAM 59745 V100A...