NCV8800
NCV8800 is Synchronous Buck Regulator manufactured by onsemi.
Features
- Output Voltage Options: 2.6 V, 3.3 V, 5.0 V, 7.5 V
- ±3.0% Output
- 3.5 V Operation
- AUXILIARY Hold Up Pin (for Cranking Conditions)
- On--Chip Switching Power Devices (0.4 Ω RDS(ON))
- Constant Frequency
- Synchronous Operation
- On--Chip Charge Pump Control Circuitry
- Nonoverlap Logic
- Power Up Sequencing Control Option (2.6 V and 3.3 V Only)
- ENABLE Battery Voltage Capable Option
- Selectable Reset Delay
- Dual Pin Feedback Connection
- V2™ Control Topology
- Internally Fused Leads in SO--16L Package
- NCV Prefix for Automotive and Other Applications Requiring Site and Change Control
- These devices are available in Pb--free package(s). Specifications herein apply to both standard and Pb--free devices. Please see our website at .onsemi. for specific Pb--free orderable part numbers, or contact your local ON Semiconductor sales office or representative. Typical Applications
- Telemunications
- Mobile Multimedia
- Instrumentation
- Automotive Entertainment Systems http://onsemi.
16 1
SO--16L DW SUFFIX CASE 751G
PIN CONNECTIONS AND MARKING DIAGRAM
1 AUXILIARY
ENABLE RESET GND GND DELAY
FB1 FB2
NCV8800xy AWLYYWW
16 VIN CP SWITCH GND
GND VIN2 NC P x = Voltage Ratings as Indicated Below: 2 = 2.6 V 3 = 3.3 V 5 = 5.0 V 7 = 7.5 V y = ENABLE Option as Indicated Below: S = Sequenced H = High Voltage
A = Assembly Location WL, L = Wafer Lot YY, Y = Year WW, W = Work Week
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 12 of this data sheet.
© Semiconductor ponents Industries, LLC, 2006
March, 2006 -- Rev. 11
Publication Order Number: NCV8800/D
EFFICIENCY (%)
NCV8800...
