Datasheet4U Logo Datasheet4U.com

NUD4700 - LED Shunt

Description

Pin Description Anode Cathode Positive Input Voltage to the Device Negative Input Voltage to the Device ORDERING INFORMATION Device NUD4700SNT1G Package Shipping† POWERMITE 3000/Tape & (Black) Reel SZNUD4700SNT1G POWERMITE 3000/Tape & (Black) Reel †For information on tape and reel spe

Features

  • A Simple Two Terminal Device.
  • Automatically Resets Itself if the LED Heals Itself or is Replaced.
  • ON.
  • State Voltage Typically 1 V.
  • OFF.
  • State Current less than 250 mA.
  • Available with White Package.
  • SZ Prefix (black package only) for Automotive and Other.

📥 Download Datasheet

Datasheet preview – NUD4700

Datasheet Details

Part number NUD4700
Manufacturer onsemi
File Size 223.08 KB
Description LED Shunt
Datasheet download datasheet NUD4700 Datasheet
Additional preview pages of the NUD4700 datasheet.
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
LED Shunt NUD4700 The NUD4700 is an electronic shunt which provides a current bypass in the case of a single LED going into open circuit. LEDs are by nature quite fragile when subjected to transients and surge conditions. There are also many cases where high reliability of the LED lighting must be maintained such as headlights, lighthouses, bridges, aircraft, runways and so forth. In these cases the low cost addition of the NUD4700 will provide full assurance that an entire string of LEDs will not extinguish should one LED fail. NUD4700 is also applicable to other loads where circuit continuity is required. This device is designed to be used with 1 W LEDs (nominally 350 mA @ 3 V).
Published: |