Datasheet4U Logo Datasheet4U.com

OCP2131 - Programmable Dual Output LCD Bias

Download the OCP2131 datasheet PDF (OCP2131-ORIENT included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for programmable dual output lcd bias.

Description

The OCP2131 is designed to support positive / negative driven TFT-LCD panels up to10” at least (from SFF to MFF like tablets).

The two output rails are usually connected to the Source Driver IC.

Features

  • a highly integrated step-up DC-DC converter with wide input voltage range from 2.7V to 5.5V. It is optimized for products powered by single-cell batteries (Li-Ion, Ni-Li, and Li-Polymer) and symmetrical output currents up to 80mA. An LDO and charge pump generate dual outputs at +5V (default) and -5V (default), whose voltages can be programmed via an I2C compatible interface. Optimized step-up, LDO and charge pump converters maximize conversion efficiency, exceeding 85%. OCP2131 integrates all co.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (OCP2131-ORIENT-CHIP.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number OCP2131
Manufacturer ORIENT-CHIP
File Size 381.08 KB
Description Programmable Dual Output LCD Bias
Datasheet download datasheet OCP2131 Datasheet

📁 Similar Datasheet

  • OCP-PCP116 - SIX PIN DIP SINGLE CHANNEL PHOTO IC PHOTOCOUPLER (ETC)
  • OCP-PCT4116 - Transistor/Diode Output Optocoupler (Lumex Opto Components)
  • OCP3601 - Step-Up DC/DC Controller (OCS)
  • OCP8020 - Standalone Linear Lithium Battery Charger (Orient Chip)
  • OCP8107 - One-Channel High Power LED Controller (Orient Chip)
  • OCP8108A - One-Channel High Power LED Controller (Orient Chip)
  • OCP8109A - One-Channel High Power LED Controller (Orient Chip)
  • OCP8110 - 500mA Buck/Boost Charge Pump LED Driver (Orient Chip)
  • OCP8110A - 500mA Buck/Boost Charge Pump LED Driver (Orient Chip)
  • OCP8111 - 1.0A Buck/Boost Charge Pump LED Driver (Orient Chip)
Other Datasheets by ORIENT-CHIP
  • OCP2152 - 1.2A Synchronous Step-Down DC-DC Converter
  • OCP2153 - 1.5A Synchronous Step-Down DC-DC Converter
  • OCP2156 - 500mA Synchronous Step-Down Converter
  • OCP2157 - 700mA Synchronous Step-Down Converter
  • OCP2158 - 1.5MHz 700mA Synchronous Step-Down Converter
  • OCP2161 - 800mA Synchronous Step-Down Converter
  • OCP2182 - 1.6A Synchronous Step-Down DC-DC Converter
  • OCP2183 - PWM Step-Down Synchronous Rectified DC-DC Regulator

Full PDF Text Transcription

Click to expand full text
WWW.ORIENT-CHIP.COM OCP2131 Programmable Dual Output LCD Bias for Smartphone and Tablets ◼ General Description The OCP2131 is designed to support positive / negative driven TFT-LCD panels up to10” at least (from SFF to MFF like tablets). The two output rails are usually connected to the Source Driver IC. The device uses a single inductor scheme in order to provide the user the smallest solution size possible as well as high efficiency. It features a highly integrated step-up DC-DC converter with wide input voltage range from 2.7V to 5.5V. It is optimized for products powered by single-cell batteries (Li-Ion, Ni-Li, and Li-Polymer) and symmetrical output currents up to 80mA.
Published: |