Datasheet4U Logo Datasheet4U.com

OB2262 - Current Mode PWM Controller

Download the OB2262 datasheet PDF. This datasheet also covers the OB2262_On variant, as both devices belong to the same current mode pwm controller family and are provided as variant models within a single manufacturer datasheet.

General Description

OB2262 is a highly integrated current mode PWM control IC optimized for high performance, low standby power and cost effective offline flyback converter applications in sub 30W range.

PWM switching frequency at normal operation is externally programmable and trimmed to tight range.

Key Features

  • Extended Burst Mode Control For Improved Efficiency and Minimum Standby Power Design.
  • Audio Noise Free Operation Programmable PWM Switching.
  • External Frequency.
  • Internal Synchronized Slope Compensation.
  • Low VDD Startup Current and Low Operating Current (1.4mA).
  • Leading Edge Blanking on Current Sense Input.
  • Good Protection Coverage With Auto SelfRecovery o VDD Over Voltage Clamp and Under Voltage Lockout with Hysteresis (UVLO) o Gate Output Maximum Voltage Clamp (18V.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (OB2262_On-Bright.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number OB2262
Manufacturer On-Bright
File Size 421.69 KB
Description Current Mode PWM Controller
Datasheet download datasheet OB2262 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OB2263 Current Mode PWM Controller Kexin
OB2268 Current Mode PWM Controller Liteon
OB2268 Flyback switching power supply applications On-Bright Electronics
OB2268AP Current Mode PWM Controller Liteon
OB2269 PWM controller JSMICRO

Other Datasheets by On-Bright

Part Number Description
OB2263 Current Mode PWM Controller
OB2263AP Current Mode PWM Controller
OB2263CP Current Mode PWM Controller
OB2263MP Current Mode PWM Controller
OB2211 Primary-Side Regulation PWM Power Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
OB2262 Current Mode PWM Controller GENERAL DESCRIPTION OB2262 is a highly integrated current mode PWM control IC optimized for high performance, low standby power and cost effective offline flyback converter applications in sub 30W range. PWM switching frequency at normal operation is externally programmable and trimmed to tight range. At no load or light load condition, the IC operates in extended ‘burst mode’ to minimize switching loss. Lower standby power and higher conversion efficiency is thus achieved. www.DataSheet4U.com VDD low startup current and low operating current contribute to a reliable power on startup design with OB2262. A large value resistor could thus be used in the startup circuit to minimize the standby power.