Datasheet4U Logo Datasheet4U.com

PE4256 - SPDT CATV UltraCMOS Switch

Description

The PE4256 is an UltraCMOS® Switch designed for CATV applications, covering a broad frequency range from 5 MHz up to 3 GHz.

This single-supply SPDT switch integrates a two-pin CMOS control interface.

Features

  •  75Ω characteristic impedance.
  •  Integrated 75Ω terminations.
  •  CTB performance of.
  • 90 dBc.
  •  High isolation 65 dB at 1000 MHz.
  •  Low insertion loss: typically 0.5 dB at 5 MHz, 0.9 dB at 1000 MHz.
  •  High input IP3: >50 dBm.
  •  CMOS two-pin control.
  •  Single +3 volt supply operation.
  •  Low current consumption: 8 μA.
  •  Unique all off terminated mode.
  •  4 x 4 mm QFN package Figure 2. Package Type 20-lead 4 x 4 mm QFN DOC-35201 Table 1. Electri.

📥 Download Datasheet

Datasheet Details

Part number PE4256
Manufacturer Peregrine Semiconductor
File Size 628.52 KB
Description SPDT CATV UltraCMOS Switch
Datasheet download datasheet PE4256 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PE42512 RF Switch pSemi
PE42445 High Isolation UltraCMOS SP4T RF Switch pSemi
PE42482 SP8T RF Switch pSemi
PE42726 SPDT RF Switch pSemi
PE4290X (PE-xxxxX) General Purpose Transformers Pulse

Other Datasheets by Peregrine Semiconductor

Part Number Description
PE42562 SP6T RF Switch
PE4250 SPDT RF Switch
PE4251 SPDT RF Switch
PE42510A SPDT High Power UltraCMOS RF Switch
PE42520 SPDT RF Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Description The PE4256 is an UltraCMOS® Switch designed for CATV applications, covering a broad frequency range from 5 MHz up to 3 GHz. This single-supply SPDT switch integrates a two-pin CMOS control interface. It also provides low insertion loss with extremely low bias requirements while operating on a single 3volt supply. In a typical CATV application, the PE4256 provides for a cost effective and manufacturable solution when compared to mechanical relays. Figure 1. Functional Diagram Product Specification PE4256 75 Ω SPDT CATV UltraCMOS® Switch 5 MHz–3 GHz Features  75Ω characteristic impedance  Integrated 75Ω terminations  CTB performance of –90 dBc  High isolation 65 dB at 1000 MHz  Low insertion loss: typically 0.5 dB at 5 MHz, 0.
Published: |