FEATURES
ÎÎConverts low-swing AC coupled differential input to HDMI™ rev 1.3 compliant open-drain current steering Rx terminated differential output ÎÎHDMI Level shifting operation up to 2.5Gbps per lane (250MHz pixel clock) ÎÎIntegrated 50-ohm termination resistors for AC-coupled differential inputs. ÎÎEnable/Disable feature to turn off TMDS outputs to enter low-power state. ÎÎOutput slew rate control on TMDS outputs to minimize EMI ÎÎIntegrated Passive DDC level shifters (3.3V source to 5V sink) ÎÎTransparent operation: no re-timing or configuration required ÎÎLevel shifter for HPD signal from HDMI/DVI connector ÎÎIntegrated pull-down on HPD_sink input guarantees "input low" when no display is plugged in ÎÎ3.3V Power supply required ÎÎTMDS output enable control ÎÎESD protection on all I/O pins àà 4kV HBM àà ±8kV contact ESD protection on the following pins →→ OUT_Dx± →→ SDA_SINK, SCL_SINK →→ HPD_SINK ÎÎPackaging (Pb-free & Green available): àà 48 TQFN, 7mm × 7mm (ZBE) DESCRIPTION
Pericom Semiconductor’s PI3VDP411LSR provides the ability to use a Dual-mode DisplayPort™ transmitter in HDMI™ mode.
Pericom Semiconductor
