Datasheet4U Logo Datasheet4U.com

TDA8588AJ - Power Amplifier and Multiple Voltage Regulator

This page provides the datasheet information for the TDA8588AJ, a member of the TDA8588J Power Amplifier and Multiple Voltage Regulator family.

Description

Amplifiers The TDA8588 has a complementary quad audio power amplifier that uses BCDMOS technology.

It contains four amplifiers configured in Bridge Tied Load (BTL) to drive speakers for front and rear left and right channels.

Features

  • Amplifiers.
  • I2C-bus control.
  • Can drive a 2 Ω load with a battery voltage of up to 16 V and a 4 Ω load with a battery voltage of up to 18 V.
  • DC load detection, open, short and present.
  • AC load (tweeter) detection.
  • Programmable clip detect; 1 % or 4 %.
  • Programmable thermal protection pre-warning.
  • Independent short-circuit protection per channel.
  • Low gain line driver mode (20 dB).
  • Loss-of-ground and open VP safe.

📥 Download Datasheet

Datasheet preview – TDA8588AJ

Datasheet Details

Part number TDA8588AJ
Manufacturer Philips
File Size 302.35 KB
Description Power Amplifier and Multiple Voltage Regulator
Datasheet download datasheet TDA8588AJ Datasheet
Additional preview pages of the TDA8588AJ datasheet.

📁 Similar Datasheet

  • TDA8580 - Multi-purpose power amplifier (NXP)
  • TDA8580J - Multi-purpose power amplifier (NXP)
  • TDA8581 - Multi-purpose high-gain power amplifier (NXP)
  • TDA8586 - Power amplifier with load detection and auto BTL/SE selection (NXP)
  • TDA8587J - 4 x 25 W BTL power amplifier (NXP)
  • TDA8589J - I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator (NXP)
  • TDA8589xJ - I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator (NXP)
  • TDA8501 - PAL/NTSC encoder (NXP)
  • TDA8505 - SECAM encoder (NXP)
  • TDA8510J - 26 W BTL and 2 x 13 W SE power amplifiers (NXP)
Other Datasheets by Philips
  • TDA8588BJ - Power Amplifier and Multiple Voltage Regulator
  • TDA8588J - Power Amplifier and Multiple Voltage Regulator
  • TDA8589BJ - I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator
  • TDA8559T - Low-voltage stereo headphone amplifier
  • TDA8577 - Dual common-mode rejection differential line receiver
  • TDA8060ATS - Satellite ZERO-IF QPSK down-converter
  • TDA8715 - 8-Bit High-Speed Analog-to-Digital Converter
  • TDA8920TH - Class-D audio amplifier 2 x 80W Single chip

Full PDF Text Transcription

Click to expand full text
INTEGRATED CIRCUITS DATA SHEET TDA8588J; TDA8588xJ I2C-bus controlled 4 × 50 Watt power amplifier and multiple voltage regulator Product specification 2004 Feb 24 Philips Semiconductors Product specification I2C-bus controlled 4 × 50 Watt power amplifier and multiple voltage regulator FEATURES Amplifiers • I2C-bus control • Can drive a 2 Ω load with a battery voltage of up to 16 V and a 4 Ω load with a battery voltage of up to 18 V • DC load detection, open, short and present • AC load (tweeter) detection • Programmable clip detect; 1 % or 4 % • Programmable thermal protection pre-warning • Independent short-circuit protection per channel • Low gain line driver mode (20 dB) • Loss-of-ground and open VP safe • All outputs protected from short-circuit to ground, to VP or across the load • A
Published: |