Datasheet4U Logo Datasheet4U.com

DFC10E48S3.3 Datasheet Single Output

Manufacturer: Power-One

Overview: DFC10 SERIES SINGLE OUTPUT.

This datasheet includes multiple variants, all published together in a single manufacturer document.

General Description

The DFC10 Series provides power converter solutions to meet commercial and industrial requirements.

With power densities above 11 watts per cubic inch (0.67 watts per cm3), overcurrent protection, and five-sided shielded case, the DFC10 meets the most rigorous needs in an industry standard case size.

The 220KHz operating frequency of the DFC10 Series allows an increased power density while including adequate heat sinking and input/output filtering.

Key Features

  • High Power Density, up to 11 Watts per Cubic Inch (0.67 watts per cm3).
  • Efficiencies to 83% (Lower for 3.3V).
  • Low Input to Output Capacitance.
  • 700V Isolation(1544V for 48V Converters).
  • Continuous Overcurrent Protection.
  • 3.3Volt Output Available.
  • Five-Side Shielded Copper Case.
  • Extended Input Range (2:1) BOTTOM VIEW 2.02 (51.31) 0.300 (7.62) 0.000 0.200 (5.08) 0.500 (12.70) 0.61 (15.5) 0.61 (15.5) 0.000 1 2 5 3 SIDE VIEW 0.0.

More Datasheets from Power-One

Part Number Description
DFC10E48S12 SINGLE OUTPUT
DFC10E48S15 SINGLE OUTPUT
DFC10E48S5 SINGLE OUTPUT
DFC10E SINGLE OUTPUT
DFC10E12S12 SINGLE OUTPUT
DFC10E12S15 SINGLE OUTPUT
DFC10E12S3.3 SINGLE OUTPUT
DFC10E12S5 SINGLE OUTPUT
DFC10E24S12 SINGLE OUTPUT
DFC10E24S15 SINGLE OUTPUT

DFC10E48S3.3 Distributor