Datasheet4U Logo Datasheet4U.com

PT2483L - Dual H-Bridge Motor Driver

General Description

The PT2483L is a monolithic integrated motor driver designed for printer, scanner or home appliance.

The built-in two channel H-bridges designs for driving a bipolar stepping motor or two DC-brushed motors.

Key Features

  • 8V to 40V maximum supply voltage.
  • 2.5A maximum driving current at VM=24V (with additional heatsink).
  • Low switches conduction resistance: 0.4Ω(typ), high side + low side in Tj=25℃.
  • Phase and Enable control interface.
  • H-bridge driver outputs with four levels PWM constant current regulation.
  • Winding current decay modes - mixed decay - slow decay - fast decay.
  • Drives single bipolar stepping motor or dual brushed dc Motors.
  • Built-in 3.3V reference voltage ou.

📥 Download Datasheet

Datasheet Details

Part number PT2483L
Manufacturer Princeton Technology
File Size 430.43 KB
Description Dual H-Bridge Motor Driver
Datasheet download datasheet PT2483L Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PT2480 45V/3.6A Brushed DC Motor Driver PTC
PT2482 45V/3.6A Brushed DC Motor Driver PTC
PT2424-6B Phototransistor Everlight
PT2434 3-Phase Sensorless BLDC Motor Controller PTC
PT2464 2-CH H-bridge Driver PTC

Other Datasheets by Princeton Technology

Part Number Description
PT2481 45V/3.6A Brushed DC Motor Driver
PT2484 Dual H-Bridge Motor Driver
PT2484A Dual H-Bridge Motor Driver
PT2485 H-Bridge Motor Driver
PT2432 3-Phase Sensor-less BLDC Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PRELIMINARY PT2483L 40V/2.5A, Dual H-Bridge Motor Driver DESCRIPTION The PT2483L is a monolithic integrated motor driver designed for printer, scanner or home appliance. The built-in two channel H-bridges designs for driving a bipolar stepping motor or two DC-brushed motors. The H-bridge driver is consists by all of N-channel MOSFET allows delivering up to 2.5A maximum output current (VM=24 V, Ta=25°C). The Phase/Enable input interface is a common configuration for the motor driver; it is very versatile to control the H-bridge switches to determinate motor winding current and phase. The motor current decay mode is programmable by a tri-states input pin.