PA2983.230HLT
PA2983.230HLT is SMT Power Inductor manufactured by Pulse.
SMT Power Inductors
Power Beads
- PA2983.XXXHL Series
Current Rating: Over 52Apk Inductance Range: 23n H to 65n H Height: 4.0mm Max Footprint: 4.0mm x 5.0mm Max Halogen Free
Electrical Specifications @ 25°C
- Operating Temperature -40°C to +125°C
Part Number
Inductance1 @ 0ADC
(n H +/- 15%)
Inductance @ Irated (n H TYP)
Irated2 (ADC)
DCR3 (mΩ nominal)
Saturation Current4 (A TYP)
25°C
100°C
Heating Current5 (A TYP)
0.33+/- 10%
75+
PA2983.650HLT
0.33 +/- 10%
Notes:
1. Inductance is measured at 100k Hz, 100m Vrms.
6. In high volt- time applications, additional heating in the ponent can occure due to
2. The rated current as listed is either the saturation current or the heating current core losses in the inductor which may necessitate derating the current in order to limit depending on which value is lower. the temperature rise of the ponent. To determine the approximate total losses (or
3. The nominal DCR is measured from point a to b , as shown below on the temperature rise) for a given application, the coreloss and temperature rise curves can mechanical drawing. be used.
4. The saturation current is the typical current which causes the inductance to drop 7. The “T” suffix indicates the part is shipped in tape and reel packaging. Pulse plies to by 20% at the stated ambient temperatures (25°C, 100°C). This current is determined the industry standard type and reel specification EIA481. The tape and reel for this product by placing the ponent in the specified ambient environment and applying a has a width (W=12mm), pitch (Po=0.8mm) and depth (Ko=12mm). short duration pulse current (to eliminate self-heating effects) to the ponent. 8. The temperature of the ponent (ambient plus temperature rise) must be within the
5. The heating current is the DC current which causes the part temperature to increase stated operating temperature range. by approximately 40°C when used in a typical...
