900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






RF Micro Devices

RFMD0014 Datasheet Preview

RFMD0014 Datasheet

DIRECT QUADRATURE MODULATOR

No Preview Available !

RFMD0014
Direct Quadra-
ture Modulator
RFMD0014
DIRECT QUADRATURE MODULATOR
Package: QFN, 24-Pin, 4mm x 4mm
Features
ACPR Performance: -70dBc Typ.
for 1-Carrier WCDMA
Very High Linearity: +26dBm
OIP3
Very Low Noise Floor:
-160 dBm/Hz
High Output Power: +12dBm
P1dB
Typical Carrier Feed-Through:
<-40 dBm
Single-Ended or Differential LO
Drive
Typical Sideband Suppression:
<-40 dBc
Single +5V Supply
Small 24-Pin, 4mmx4mm, QFN
Applications
Cellular, 3G Infrastructure
WiBro, WiMax, LTE
WLAN or WLL Systems
GMSK, QPSK, DQPSK, QAM
Modulation
Functional Block Diagram
Product Description
The RFMD0014 is direct quadrature modulator for use in cellular base
stations and other communications systems. RFMD0014 supports cellu-
lar, 3G, WiMax, and LTE air interface standards. This device features oper-
ation from 700MHz to 1000MHz with excellent carrier and sideband
suppression and ultra low noise floor. The device is manufactured in an
advanced GaAs HBT process. The RFMD0014 operates from a single 5V
supply and is packaged in a low cost, 4mm x 4mm, 24-pin leadless pack-
age.
DS100819
Optimum Technology Matching® Applied
GaAs HBT
GaAs MESFET
InGaP HBT
SiGe BiCMOS
Si BiCMOS
SiGe HBT
GaAs pHEMT
Si CMOS
Si BJT
GaN HEMT
RF MEMS
LDMOS
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trade-
mark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc.
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
1 of 10




RF Micro Devices

RFMD0014 Datasheet Preview

RFMD0014 Datasheet

DIRECT QUADRATURE MODULATOR

No Preview Available !

RFMD0014
Absolute Maximum Ratings
Parameter
Supply Voltage
LO Input
Operating Temperature
Storage Temperature
Maximum Junction Temperature
Power Dissipation
BB CM Voltage
Thermal Resistance
ESD
Rating
5.5
+10
-40 to +85
-65 to +150
+150
1200
1.8
28
Class 1C (1000V)
Unit
V
dBm
°C
°C
°C
mW
V
°C/W
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Parameter
Specification
Min. Typ. Max.
Unit
Condition
General
Supply Voltage
4.75
5
5.25
V
Supply Current
166 185 204 mA
RF Output
RF Frequency Range
700
1000
MHz
Carrier Feed through
-40
dBm
Uncalibrated
Sideband Suppression
-40 dB Uncalibrated
OIP3
23 26
dBm
Baseband input 800mVPP, 20kHz
RF Port Return Loss
15 dB
POUT
-3
0
3
dBm
Baseband input 800mVPP, CW quadrature
ACP -70 dBc RF output -10dBm, 1 carrier WCDMA
Broadband Noise Floor
-160
dBm/Hz 20MHz offset, BB OVPP
Output Power Flatness
0.25
dB Over 60MHz BW
P1dB
9 12
dBm
LO Input
LO Frequency Range
700
1000
MHz
LO Input Power
-3 0 3 dBm
Return Loss
15 dB
BB Inputs
I/Q Input Frequency Range
DC
300 MHz
BB Input Impedance
600 Differential impedance
Common Mode Voltage
1.5 V
Note: Typical performance at nominal conditions unless otherwise noted: VCC=+5V, Temperature=+25°C, Baseband CM Voltage=+1.5V, LO
Frequency=900MHz, LO Power=0dBm, Single-Ended
2 of 10
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
DS100819


Part Number RFMD0014
Description DIRECT QUADRATURE MODULATOR
Maker RF Micro Devices
Total Page 10 Pages
PDF Download

RFMD0014 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 RFMD0014 DIRECT QUADRATURE MODULATOR
RF Micro Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy