900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






RF Micro Devices

RFOS6012 Datasheet Preview

RFOS6012 Datasheet

hybrid high dynamic range optical receiver module

No Preview Available !

RFOS601X
GaAs Optical Receiver
45MHz to 1200MHz
RFOS601X is a hybrid high dynamic range optical receiver
module. Two of the module pins are for connection to 24V (DC),
one for amplifier supply voltage, the other for the PIN diode bias.
The module contains a single mode optical input suitable for
wavelengths from 1290nm to 1600nm, a terminal to monitor the
PIN diode current and an electrical output with an impedance of
75Ω.
BIAS
V+
OPTICAL INPUT
MONITOR
OUTPUT
RFOS601X
Package: SOT-115J
Features
■ Superior Return Loss Performance
■ Extremely Low Distortion
■ Optimal Reliability
■ Very Low EINC
■ 30.0dB A/W Min. at 1200MHz
■ 250mA Max. at 24V+
Applications
■ 45MHz to 1200MHz CATV
Amplifier Systems
Ordering Information
RFOS6012
RFOS6013
See Page 3
Box with 3 Pieces
Box with 3 Pieces
Absolute Maximum Ratings
Parameter
Optical Input Power
DC Supply Over-Voltage (5 minutes)
ESD Sensitivity, Acc. MIL-Standard 1686C
(human body model; R = 1.5kΩ, C = 100pF)
Storage Temperature
Operating Mounting Base Temperature
Minimum Fiber Bending Radius
Maximum Tensile Strength
Rating
5
30
500
-40 to +85
-20 to +85
35
5
Unit
mW
V
V
°C
°C
mm
N
Caution! ESD sensitive device.
RoHS (Restriction of Hazardous
Substances): Compliant per EU Directive
2011/65/EU.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140306
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 4




RF Micro Devices

RFOS6012 Datasheet Preview

RFOS6012 Datasheet

hybrid high dynamic range optical receiver module

No Preview Available !

RFOS601X
Nominal Operating Parameters
Parameter
Specification
Min Typ Max
Unit
Condition
General Performance
V+ = 24V; TMB = 30°C; ZL = 75Ω
Responsivity
Slope[1]
2400
30.0
0
2650
31.0
V/W
f = 1200MHz, λ = 1310nm
dB A/W
2 dB f = 45MHz to 1200MHz
Flatness of O/E Response
<0.7 1.0 dB f = 45MHz to 1200MHz (peak to valley)
Optical Return Loss
45
dB
Output Return Loss
15 17
dB f = 45MHz to 1200MHz
Equivalent Input Noise
Spectral Sensitivity
4.2 4.6 pA/ √Hz f = 50MHz to 1200MHz
0.90
A/W λ = (1310± 20)nm
0.90
A/W λ = (1550± 20)nm
Optical Wavelength
1290
1600
nm
Total DC Current
245 250 mA module pin 4 and pin 5 connected to V+
PIN Diode Bias Current
Distortion Data
Second Order Distortion[2]
1.5 5 mA
V+ = 24V; TMB = 30°C; ZL = 75Ω
-75 -71 dBc fm = 54MHz; f1 = 187.25MHz; f2 = 133.25MHz
-75 -70 dBc fm = 446.5MHz; f1 = 97.25MHz; f2 = 349.25MHz
-70 -65 dBc fm = 548.5MHz; f1 = 109.25MHz; f2 = 439.25MHz
-68 -63 dBc fm = 746.5MHz; f1 = 133.25MHz; f2 = 613.25MHz
-68 -63 dBc fm = 854.5MHz; f1 = 133.25MHz; f2 = 721.25MHz
Third Order Distortion[3]
-66 -63 dBc fm = 986.5MHz; f1 = 133.25MHz; f2 = 853.25MHz
-78 -75 dBc fm = 55.25MHz; f1 = 109.25MHz; f2 = 133.25MHz; f3 = 187.25MHz
-78 -75 dBc fm = 445.25MHz; f1 = 193.25MHz; f2 = 349.25MHz; f3 = 97.25MHz
-78 -75 dBc fm = 547.25MHz; f1 = 217.25MHz; f2 = 439.2MHz; f3 = 109.25MHz
-78 -75 dBc fm = 745.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 613.25MHz
-78 -75 dBc fm = 853.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 721.25MHz
-78 -75 dBc fm = 985.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 853.25MHz
1. The slope is defined as the difference between the O/E response at the start frequency (45MHz) and the O/E response at the stop frequency
(1200MHz).
2. Two laser test; each laser with 40% OMI; Popt = 1mW (total).
3. Three laser test; each laser with 60% OMI; Popt = 1mW (total).
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140306
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 4


Part Number RFOS6012
Description hybrid high dynamic range optical receiver module
Maker RF Micro Devices
PDF Download

RFOS6012 Datasheet PDF





Similar Datasheet

1 RFOS6012 hybrid high dynamic range optical receiver module
RF Micro Devices
2 RFOS6013 hybrid high dynamic range optical receiver module
RF Micro Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy