Datasheet4U Logo Datasheet4U.com

BD11670GWL - USB Switch

General Description

BD11670GWL is a DPDT analog switch that supports USB2.0 high-speed and has both a low resistance and a low capacitance.

It supports input of dual power supplies from VBUS and VCC.

VBUS of up to 28V is supported.

Key Features

  • Dual Power-Supply Architecture, VCC and VBUS.
  • Power Supply Range (VBUS) : 3.8V to 28V.
  • Power Supply Range (VCC) : 3.0V to 5.5V.
  • 5Ωswitches between the input and the output.
  • Low Capacity 2ch Analog SW.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BD116 NPN Transistor INCHANGE
BD112 NPN Transistor INCHANGE
BD115 Small Signal Transistors Central Semiconductor
BD115 NPN Silicon Transistor TRANSYS
BD115 Bipolar NPN Device Semelab

Other Datasheets by ROHM

Part Number Description
BD11600NUX USB Switch
BD1020HFV Temperature Sensor
BD10KA5FP Low ESR Capacitor
BD10KA5FP-E2 500mA Variable/Fixed Output LDO Regulators
BD10KA5WF Low ESR Capacitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
USB Switch IC DPDT Type (Double Pole Double Throw) BD11670GWL General Description BD11670GWL is a DPDT analog switch that supports USB2.0 high-speed and has both a low resistance and a low capacitance. It supports input of dual power supplies from VBUS and VCC. VBUS of up to 28V is supported. All terminals have electrostatic discharge protection circuit built-in. Features  Dual Power-Supply Architecture, VCC and VBUS.  Power Supply Range (VBUS) : 3.8V to 28V.  Power Supply Range (VCC) : 3.0V to 5.5V.  5Ωswitches between the input and the output.  Low Capacity 2ch Analog SW.